Panasonic PV-27DF5 Operating Instructions Manual

Also see for PV27DF5 - DVD/TV UNIT: Service manual

Panasonic PV-27DF5 Operating Instructions Manual Manual pdf 43 page image

43Disc OperationSelect the digital output to be output from the optical digital audiooutput connector of the unit. LPCM (DVD)1 Press ACTION in Stop mode to display MAIN MENU.2 Press ▲▼◄► to select“DVD.”3 Press SET to display DVDMAIN MENU.MAIN MENUDVD LOCK LANGUAGETV CLOCK CHSELECT: SET:SETEND :ACTION4 Press ▲▼ to select “AUDIOOUTPUT.”5 Press SET to display AUDIOOUTPUT screen.6 Press ▲▼ to select an item.7 Press SET repeatedly fordesired output. Dolby DigitalOFF:Linear PCM of less than 48 kHz/16 bit is output. When playingDVDs recorded in linear PCM of over 48 kHz/20 bit, no digitalaudio is output. (Factory preset)PCM:When playing DVDs recorded in linear PCM of 48 kHz/20 bit/24bit or more, digital audio converted to 44.1 kHz/16 bit or 48kHz/16 bit is output.(Digital output of PCM audio is restricted to 48 kHz/16 bit orbelow for copyright protection.)Bitstream:Dolby Digital bitstream (1ch-5.1ch) is output. (Factory preset)PCM:When you have connected an amplifier that doesn’t have a built-in Dolby Digital decoder.Selecting AUDIO OUTPUT8 Press ACTION to redisplay DVD MAIN MENU and goto step 4 to set up another item. Or, press ACTIONthree times to exit. dts selection DRC (Dynamic Range Compression)Bitstream:dts bitstream is output. (Factory preset)PCM:When you have connected an amplifier that doesn’t have a built-in dts decoder.OFF:Normal audio range is selected. (Factory preset)ON:For dynamic sound even at low volume. This is useful for late-night listening. [Dolby Digital DVDs only].DVD-VNote:• Make settings according to amplifier connected to optical audio outputas shown in above table.Type of amplifier to beconnectedRecommended settingLPCM(DVD)DolbyDigital dtsNo amplifier isconnectedAV amplifier withoutDolby Digital/dtsdecoderPCM PCM* 1 PCM* 1AV amplifier includingDolby Digital decoder PCM Bitstream* 3 PCMAV amplifier includingDolby Digital/dtsdecoderPCM Bitstream* 3 Bitstream* 2* 1 When connecting an amplifier (with an optical digital input connector)which does not contain the Dolby Digital or dts decoder, be sure toselect “PCM.” If “Bitstream” is selected, starting DVD play may causesuch a high level of noise as to be harmful to your ears and damagethe speakers.* 2 When a dts decoder is connected, please select “Bitstream” in “dts.” If“PCM” is selected, there will be stereo sound.* 3 When a Dolby Digital decoder is connected, please select “Bitstream”in “Dolby Digital.” If “PCM” is selected, there will be stereo sound.D V D M A I N M E N UD I S C L A N G U A G E SA U D I O O U T P U TS T I L L M O D E : A U T OT V M O D E : 4 : 3 P a n & S c a nS E L E C T : ▲ ▼S E T : S E TE N D : A C T I O NA U D I O O U T P U TL P C M ( D V D ) : O F FD o l b y D i g i t a l : B i t s t r e a md t s : B i t s t r e a mD R C : O F FS E L E C T : ▲ ▼S E T : S E TE N D : A C T I O N• When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unitor the disc.