18 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfoMTS Broadcast / TV Stereo SystemThe following are possible audio broadcast types and on-screendisplays. The signal being received is indicated with a “ ” markwhile the selected audio mode is indicated with an arrow. Tochange the audio mode for these broadcasts, see the “Audio Modefor TV Viewing” section.1 Press DISPLAY to display the broadcast signalbeing received. MTS Stereo broadcast:Multi-channel Television Sound Stereo broadcast. SelectSTEREO audio mode.• If stereo broadcast is weak and the display flickers, selectMONO audio mode for possible improvement. SAP broadcast:Secondary Audio Program (sub language).Select SAP audio mode for the sub language.1 Press AUDIO to select the desired audio mode asdescribed above. (Arrow shows selection.)• Each press of AUDIO will change the audio mode as shown below.• “SAP” is selected with first press of AUDIO. MONO broadcast:Normal monaural sound broadcast.< Example >Equipped with -TV Noise Reduction for true MTSreproduction. -TV Noise Reduction is required for goodstereo separation and audio fidelity. is a registeredtrademark, and is licensed by Technology Licensing. MTS Stereo and SAP broadcast:Multi-channel Television Sound Stereo (main language) andSecondary Audio Program (sub language) broadcasts are beingreceived simultaneously. Select the STEREO or SAP audiomode.DISPLAYAUDIOReceivable Broadcast TypesAudio Mode for TV Viewing12:00AM CH 08STEREOSAPMONO12:00AM CH 08STEREOSAPMONO12:00AM CH 08STEREOSAPMONO12:00AM CH 08STEREOSAPMONO12:00AM CH 08STEREOSAPMONO12:00AM CH 08STEREOSAPMONO12:00AM CH 08STEREOSAPMONO