Panasonic PV-27DF5 Operating Instructions Manual

Also see for PV27DF5 - DVD/TV UNIT: Service manual

Panasonic PV-27DF5 Operating Instructions Manual Manual pdf 16 page image

16 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfoTV Operation Method 1:Press CH ▲▼. The display will change as follows. Select desired channel:Press CH ▲▼ or NUMBER keys. Adjust desired volume level:Press VOL + or VOL -.CH▲▼100 keySelecting Input ModeUsing the CH/VOL ButtonVOL+/-RAPIDTUNEMUTE Method 2:Press INPUT. The display will change as follows.INPUTAV Input Terminal 2Notes:• The diagram at right is an example.• TV CH 2 and CABLE CH 1 representthe lowest channels in memory,while TV CH 69 and CABLE CH 125represent the highest channels inmemory.LINE2LINE1 TUNERLINE 1:Signal of source connected to AV Input terminal 1 is displayed.(Rear of the unit.)LINE 2:Signal of source connected to AV Input terminal 2 is displayed.TUNER:Signal of source connected to VHF/UHF terminal is displayed.(TV)CH69(CABLE)CH125LINE2(TV)CH2(CABLE)CH1When selecting CABLE channels 100 to 125 with the NUMBERkeys, first press the 100 key, and then enter the remaining twodigits.Example 1:To select channel 125, first press the 100 key, then 2, then 5.Example 2:To select channel 12, first press the 1 key, then 2.Example 3:To select channel 2, first press the 0 key, then 2.Using the Number and 100 keysLINE1NUMBERkeys Method 3:1 Press ACTION for MAIN MENU.2 Press ▲▼◄► to select “TV”, then press SET forSET UP TV screen.3 Press ▲▼ to select “INPUT SELECT,” and thenpress SET to select “TUNER”, “LINE 1”, or “LINE 2.”4 Press ACTION twice to exit this mode.MAIN MENUDVD LOCK LANGUAGETV CLOCK CHSELECT: SET:SETEND :ACTIONSET UP TVCAPTIONINPUT SELECT :TUNERSET UP VIDEO/AUDIODVD VOL ADJUST :+2SELECT: SET:SETEND :ACTIONACTIONSELECT▲▼◄►/SET