Panasonic PV-27DF5 Operating Instructions Manual

Also see for PV27DF5 - DVD/TV UNIT: Service manual

Panasonic PV-27DF5 Operating Instructions Manual Manual pdf 13 page image

13TV OperationPOWERACTIONSELECT▲▼◄►/SETEJECTSTOPPOWER PLAYTuning TVPlease make all cable or antenna connections before powering on.Plug the unit power cord into an AC wall outlet.Settings are made automatically. Whencomplete, this screen appears.If setup is incomplete, the followingscreen appears. Check connection ofAntenna/Cable to the RF in Terminal,then try to manually set the clock asfollows.a . Press ACTION on the Remote Control to displaySET CLOCK Menu screen.b. Press ▲▼ to select the month and press SET toset. In the same manner, select and set the date,year, time, and DST (Daylight Saving Time).• Press ◄ repeatedly to move the cursor. Press ▲▼ to make acorrection.c . Press ACTION twice to start CLOCK and exit.Case 1Case 2Initial Setup (Ready to Play)• Function buttons are void during Initial Setup.• If Auto Clock Set takes more than 30 minutes, press STOP and performsettings manually. (See pages 14-15.)1 Press POWER on the Remote Control or unit. Autochannel and clock set start.• If you use a cable box, turn it on and set it to the Public BroadcastingService (PBS) channel in your time zone. If you use a DSS receiver,it must be turned off.5 Press ▲▼ to select “AUTO SET,” then press SET.Note:• After Channel Auto Set is finished, Clock Auto Set will be performed. (Ifclock is set manually, Clock Auto Set will not be performed.)2 Press ▲▼◄► to select “CH.”3 Press SET to display SET UP CHANNEL screen.1 Press ACTION to display MAIN MENU.Automatic Channel Setting4 Press ▲▼ to select “ANTENNA,” then press SET toset your antenna system (“TV” or “CABLE”).CH AUTO SET PROCEEDINGAUTO CLOCK SETPROCEEDINGCANCEL:STOP10/25/2005 TUE 11:45AMDST:ONSETTING : CH 10AUTO CLOCK SETCOMPLETEDAUTO CLOCK SETIS INCOMPLETEPLEASE SET CLOCK BYPRESSING ACTION KEYSET CLOCK1/ 1/2005 SAT 12:00AMDST:ONSELECT: SET:SETSTART :ACTIONSET CLOCK10/25/2005 TUE 11:45AMDST:ONSELECT: SET:SETSTART :ACTIONMAIN MENUDVD LOCK LANGUAGETV CLOCK CHSELECT: SET:SETEND :ACTIONSET UP CHANNELANTENNA : CABLEAUTO SETWEAK SIGNAL DISPLAY:OFFSELECT: SET:SETEND :ACTIONCH ▲▼ADD/DLTNUMBER KeysSKIP Ι◄◄ STOP