Panasonic PV 20D53 Operating Instructions Manual

Also see for PV 20D53: Operating instructions

Contents

Panasonic PV 20D53 Operating Instructions Manual Manual pdf 48 page image

48 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com48 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.comSTILL MODE1 1) Press * to select“STILL MODE.”2) Press SET repeatedlyfor mode. (See below)2Do steps 1 and 2 on page 46.AUTO: “FIELD” (Field still) or “FRAME” (Frame still)is automatically selected during the still mode.(Factory preset)FIELD: “FIELD” (Field still) is always selected.This setting will reduce jitter when comparedwith “AUTO” on some discs.FRAME: “FRAME” (Frame still) is always selected.Some texts and fine patterns will be seen clearlywhen compared with “AUTO” on some discs.Selecting TV MODEa 1) Press to select “TVMODE.”2) Press SET repeatedlyfor mode. (See below.)bDo steps 1 and 2 on page 46.4:3 Pan & Scan : Widescreen video data is played in Pan& Scan style (left and right of screen istrimmed.)• Video data not formatted in Pan &Scan will play in letterbox style.4:3 Letterbox : Widescreen video data is played inLetterbox style (top and bottom ofscreen has black margin).Set the screen display style for widescreen video materialplayback.4:3 Pan & Scan (Factory preset)4:3 LetterboxSet to reduce jitter in a displayed still picture or a motionpicture.3 Press ACTION twice to exit this mode.Press ACTION twice to exit this mode.cExample(Factory preset)*Important:If a remote control button does notwork when pressed, press the DVDbutton on the remote and try thebutton again.DVD MAIN MENUSELECT :SET : SETEND : ACTIONDISC LANGUAGESAUDIO OUTPUTST I L L MODE : AUTOTV MODE : 4:3 Pan & ScanDVD MAIN MENUSELECT :SET : SETEND : ACTIONDISC LANGUAGESAUDIO OUTPUTST I L L MODE : AUTOTV MODE : 4:3 Pan & ScanSettings for DVD Operation (continued)ACTIONSELECTSET