Panasonic PV 20D53 Operating Instructions Manual

Also see for PV 20D53: Operating instructions

Contents

Panasonic PV 20D53 Operating Instructions Manual Manual pdf 19 page image

1919TV OperationMTS Broadcast/TV Stereo SystemReceivable Broadcast TypesThe following are possible audio broadcast types and on-screendisplays. The signal being received is indicated with an “ ”mark while the selected audio mode is indicated with an arrow.To change the audio mode for these broadcasts, see the “AudioMode for TV Viewing” section below.Press DISPLAY to display the broadcast signal beingreceived.MTS Stereo and SAP broadcastMulti-channel Television Sound Stereo(main language) and Secondary AudioProgram (sub language) broadcastsare being received simultaneously.Select the STEREO or SAP audiomode.MTS Stereo broadcastMulti-channel Television Sound Stereobroadcast. Select STEREO audiomode.• If stereo broadcast is weak and thedisplay flickers, select MONO audio modefor possible improvement.SAP broadcastSecondary Audio Program (sublanguage). Select SAP audio mode forthe sub language.Audio Mode for TV ViewingPress AUDIO to select the desired audio mode as described above.(Arrow shows selection.)• Each press of AUDIO will change the audio mode as shown below.• “SAP” is selected with first press of AUDIO.MONO broadcastNormal monaural sound broadcast.1 2 : 0 0A M CH08STER EOSAPMONO1 2 : 0 0 A M CH08STER EOSAPMONOSTER EOSAPMONO1 2 : 0 0A M CH08STER EOSAPMONO1 2 : 0 0A M CH08< Example >STER EOSAPMONOPress AUDIOPress AUDIOPress AUDIOEquipped with -TV NoiseReduction for true MTSreproduction.-TV Noise Reduction isrequired for good stereo separationand audio fidelity.is a registered trademark, andis licensed by TechnologyLicensing.STER EOSAPMONOSTER EOSAPMONODISPLAYAUDIO