Menu
Panasonic PT-LW321U Operating Instructions Manual
Also see for PT-LW271U: SpecificationsOperating instructionsOperating instructions
                                                                        |
AppendixENGLISH - 67 AppendixModeDisplayresolution *1(dots)Scanningfrequency Dot clockfrequency(MHz)FormatPlug and play *3H (kHz) V (Hz) COMPUTER 1/COMPUTER 2 HDMISXGA 1 280 x 1 02463.98 60.0 108.00 R/H o o79.98 75.0 135.00 R/H o o91.15 85.0 157.50 R/H - -1366x768 1 366 x 768 47.72 59.8 84.75 R/H o oSXGA+ 1 400 x 1 050 65.32 60.0 121.75 R/H o oUXGA 1 600 x 1 200 75.00 60.0 162.00 R/H o o*1: “i” added to the resolution value indicates an interlaced signal.*2: HDMI signal of 480i and 576i is only supported by 27MHz Dot clock signal.*3: Where marked "o" signals indicates in Plug and Play is compatible with EDID of projector. Unmarked signals in Plug andPlay may also be compliant if input terminals are written in the format list. Where Plug and Play is unmarked and nothing iswritten in the format list, difficulties in projecting image may occur even when computer and projector appear to have sameresolution.NoteThe number of display dots is 1 024 x 768 for the PT-LX351U, PT-LX321U, PT-LX271U and 1 280 x 800 for the PT-zLW321U, PT-LW271U.A signal with a different resolution will be projected after converting the resolution to match the projector display.When interlaced signals are connected, flicker may occur on the projected image.zEven the above signals exist, some image signals that recorded in special method may not be displayed.zThe |
Related manuals for Panasonic PT-LW271U
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved