Setting up24 - ENGLISHGetting StartedAdjusting the Projector's HeightThe projector is equipped with elevator feet for adjusting the image height.Extend the adjustable feet by rotating in the direction shown in the below picture and retract by rotating in the op-posite direction.Adjustable rangeRear adjustable feet :10 mm (0.394")Adjustable rangeFront adjustable feet :19 mm (0.748")The front adjustable feet stretch to its endThe rear adjustable feet stretch to its end2.7 ° 6 °AttentionIt is very hot around the lamp and the air exhaust port when the lamp is lighting and for a while after the lamp is turned off.zAnd, hot air is expelled from the air exhaust port when the lamp is lighting. Do not touch there directly when adjusting theadjustable feet.Do not stretch the adjustable feet more than the above mentioned length. Otherwise, the projector may be unstable or thezadjustable feet may fall off.