Audio42- ENGLISHSettingsAudioSelect [Audio] from the Main Menu (see “Howto operate menu” on page 33) and then selectthe item from the Sub Menu.MuteTemporarily turn off the sound.Press ▲▼ to select [Mute].1)Press ► to display the setting dialog2)box.Press ◄► to switch [On]/[Off].3)OnMute.OffOutput audio.Pressz button on the remote controlcan also turn on/off the sound.VolumeAdjust the volume.Press ▲▼ to select [Volume].1)Press ► to display the adjustment2)dialog box.Press ◄► to adjust the volume.3)OperationAdjustmentAdjustmentrangePress ►.Turn up the volumeMaximum value 32Press ◄.Turn down thevolumeMinimum value 0You can also press the buttonszon the remote control or on the control panel.In Standby Mode (Audio)This function is used to switch the output audio signalfrom the terminal On/Off atstandby mode.Press ▲▼ to select [In Standby Mode1)(Audio)].Press ► to display the adjustment2)dialog box.Press ◄► to switch [On]/[Off].3)OnOutput the audio signal from the terminalwhen in Standby mode.OffMute the audio signal from the terminalwhen in Standby mode.NoteWhen setting the [In Standby Mode (Audio)] function toz[On] and in Standby mode status, the connected audiosignal to terminal. The audio signaloutput level is fixed and cannot be adjusted.
