Powering ON/OFF28 - ENGLISHBasic OperationON(G)/STANDBY(R) indicatorThe ON(G)/STANDBY(R) indicator informs you the status of the power. Confirm the status of the indicator before operating the projector.Indicator status StatusNo illumination The power plug is not connected to the outlet.RedLit*1 The power is switched off. (Standby mode)Press <v/b> to start projection.SlowBlinking*2The power is switched off. (Standby mode)Press <v/b> to start projection.Blinking The projector is preparing to switch off the power.The power is switched off after a while. (Changes to the standby mode.)Green Lit The projector is in the projection status.Blinking The projector is preparing for projection.1: When [LAN (Standby)], [VGA Out (Standby)], [In Standby Mode (Audio)] are all set to [Off].2: When one or more among [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] is/are set to [On].NoteWhen the indicator is blinking in red, the internal fans start to operate and the projector startszcooling. indicator
