Panasonic PN28160K Operation Manual

Also see for PN28080K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28160K Operation Manual Manual pdf 41 page image

414.6.2. System IP ConfigurationOn the Basic Switch Configuration Menu, pressing "I" opens the System IPConfiguration Menu, as shown in Fig. 4-6-3. On this screen, you can setIP-address-related settings for this Switching Hub.Fig. 4-6-3 System IP ConfigurationScreen DescriptionMACAddressShows the MAC address of the Switching Hub.This value is a unique identifier assigned to the device. It cannot bechanged.IP Address Shows the current IP address.0.0.0.0 is displayed because no address is set on shipment.Subnet Mask Shows the current subnet mask.0.0.0.0 is displayed because no address is set on shipment.DefaultGatewayShows the IP address of the router, set as a current default gateway.0.0.0.0 is displayed because no address is set on shipment.PN28160K Local Management SystemBasic Switch Configuration -> System IP Configuration MenuMAC Address: xx:xx:xx:xx:xx:xxIP Address: 0.0.0.0Subnet Mask: 0.0.0.0Default Gateway: 0.0.0.0-------------------------------- -----------------------------------Set [I]P AddressSet Subnet [M]askSet Default [G]atewaySet IP P[a]rameterSet I[P]v6 Address[Q]uit to previous menuCommand>Enter the character in square brackets to select option