Panasonic PN28160K Operation Manual

Also see for PN28080K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28160K Operation Manual Manual pdf 158 page image

1584.7.6. Storm Control Configuration MenuOn the Advanced Switch Configuration Menu, pressing "o" opens the StormControl Configuration Menu, as shown in Fig. 4-7-24. You can set the stormcontrol for unknown unicast, broadcast, and multicast traffic.Fig. 4-7-24 Storm Control Configuration MenuScreen DescriptionDLF Shows the storm control setting for unknown unicast traffic.Enabled Storm control for unknown unicast is enabled.Disabled Storm control for unknown unicast is disabled. (Factorydefault setting)Broadcast Shows the storm control setting for broadcast traffic.Enabled Storm control for broadcast is enabled.Disabled Storm control for broadcast is disabled. (Factory defaultsetting)Multicast Shows the storm control setting for multicast traffic.Enabled Storm control for multicast is enabled.Disabled Storm control for multicast is disabled. (Factory defaultsetting)Threshold Shows the threshold number of packets (Packet Per Second).PN28160K Local Management SystemAdvanced Switch Configuration -> Storm Control Configuration MenuPort Storm Control Setting:No. DLF Broadcast Multicast Threshold(pps)---- --------- --------- --------- --------------1 Disabled Disabled Disabled 02 Disabled Disabled Disabled 03 Disabled Disabled Disabled 04 Disabled Disabled Disabled 05 Disabled Disabled Disabled 06 Disabled Disabled Disabled 07 Disabled Disabled Disabled 08 Disabled Disabled Disabled 09 Disabled Disabled Disabled 010 Disabled Disabled Disabled 011 Disabled Disabled Disabled 012 Disabled Disabled Disabled 0-------------------------------- -----------------------------------[N]ext Page Set [B]roadcast Status [Q]uit to previous menu[P]revious Page Set [M]ulticast StatusSet [D]LF Status Set [T]hreshold ValueCommand>Enter the character in square brackets to select option