Panasonic PN28160K Operation Manual

Also see for PN28080K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28160K Operation Manual Manual pdf 111 page image

1114.6.11. NDP TableOn the Basic Switch Configuration Menu, pressing "D" opens the NDP Tablescreen, as shown in Fig. 4-6-40. In this screen, you can refer and configureNDP table.Fig. 4-6-40 NDP TableScreen DescriptionSorting Method Shows the order of displaying.By IP Shows the table in the order of IPv6 address.By MAC Shows the table in the order of MAC address.By Static Shows manually-set addresses.By Dynamic Shows auto-learned addresses.Type Shows the type on ARP table.Static The address is manually set.Dynamic The address is auto-learned.NDP Reachable Time Shows the NDP Reachable time.NDP State Time Shows the NDP Stale time.IPv6 Address Shows the IPv6 Address on NDP table.Hardware Address Shows the hardware address on NDP table.Status Shows the IPv6 neighbor cache.Type Shows the type on NDP table.Static The address is manually set.Dynamic The address is auto-learned.PN28160K Local Management SystemBasic Switch Configuration -> NDP TableSorting Method: By IPNDP Reachable Time: 30 Seconds NDP Stale Time: 600 SecondsIPv6 Address Hardware Address Status Type--------------------------------------- ----------------- ---------- --------------------------------------- -----------------------------------[N]ext Page [A]dd/Modify Static Entry[P]revious Page [D]elete EntrySet NDP [R]eachable Time [S]orting Entry MethodSet NDP Stale [T]ime [Q]uit to previous menuCommand>Enter the character in square brackets to select option