Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

331Chapter 17 General SpecificationsCamera Switching Unit: ANPV3700Item SpecificationFunction Camera switch 2 camera inputs - 1 camera output (switching by external ormanual signal input)Camera image division 2 camera input - 1 camera output (UP/Low),2 camera input - 1 camera output (Left/Right)Separation position (Up/Low) 240 (+/- 2) linesSeparation position (Left/Right) 240 (+/- 2) pixelsCamera input 2 inputs (A and B)Camera output 1 output (OUT)External switching signal input 1 input, 5 to 24V DC, Bi-directional photo couplerSettings of dip switches LOCAL/REMOTE, NORMAL/DIV, A/B, UP/LOW andLEFT/RIGHTDisplay Camera switching display, Green LED (A, B)Rated voltage range 12 V DC (supplied from the PV310 controller)Consumption current Max. 200 mAOperating temperature range 0°C to 50°C (without icing and dew condensation)Storage temperature range -20°C to +60°C (without icing and dew condensation)Operating/storage humidity range 35% RH to 75 % RH (without icing and dew condensation at25°C)Insulation resistance (initial) 100MΩ or more between input part and camera case or DIN rail(with a 500V DC Megger)Voltage resistance (initial) 500V AC between input part and camera case or DIN rail for oneminuteVibration resistance 10 Hz to 55 Hz, one sweep per minute, amplitude 0.75 mm, 30minutes each in X/Y/Z directionJolt resistance 196m/ s 2, 5 times each in X, Y and Z directionsWeight Approx. 150g (only the main body)