Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

234Environment Settings Chapter 9Name of an image file stored in the destination deviceThe name of an image file stored in the destination device is as follows. Header and Additional Information 1 - 4in the file name are selectable.Header Information1_Information2_Information3_Information4_Scan Camera No. .bmp0 - 16 digits 0 – 9 digits for each(Maximum number of digits + _ (one digit, under bar))• Select from the following information:• None: No additional information, 0 digit• Year-Month-Day: yyyymmdd• Time-Minute-Second: hhmmss• Total Judg.: OK or NG• Type Number: nnFixed to 9digitsThe numberof scans thatis counted byusing theStatisticsfunctionFixed to 1digitValue: 1 or 2Extension9.4.2 Setting Output Destination, Output Condition and Output Operation1. Select “Image Output Settings” listed under the ENVIRONMENT menu.The menu is displayed.2. Select “Output Settings” > “Camera 1”.Select the camera image to be output and the output procedure. Select whether or not you output eachimage captured by Cameras 1 and 2.3. Select “Output Destination”.To output images to the Compact Flash memory card inserted into the PV310, select “Card”. To outputimages to the PC connected with a LAN cable, select “Ethernet”.