Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

281Chapter 11RS-232C CommunicationDisplay Camera Image Change (%I)Changes the images to be displayed on the monitor screen using the signals from an external device such as PLC.Communication direction Command / DescriptionFrom external device to PV310 % I ? CR?: 0 to 5 (Specify the image type to be displayed in 1-digit form.)No. Display Image0 Live-C1 (Memory 1)1 Live-C2 (Memory 2)2 Live C1+C23 Memory- C1 (Memory 1)4 Memory- C2 (Memory 2)5 Memory-C1+C2Response: Normal (at the endof changing display cameraimages)% I CRResponse: Error 1• ERROR signal = “ON”• Error Code: E0172 isdisplayed on the screen% Z CRCauseAny other 1-digit number than 0 to 5 is specified.Response: Error 2 % U CRCauses• The specified image cannot be selected using the current settings of PV310.Error signal is also output.• A command in the unspecified form or not provided was received.Examples:%I01 CR (2-digit values are specified.)%J2 CR (not provided command)