Panasonic MICRO-IMAGECHECKER PV310 Use Manual

Also see for Micro-Imagechecker PV310: Brochure & specs

302Using a Compact Flash Memory CardChapter 1313.3.3 Backing up/restoring the Saved ImagesBacking up a Saved ImageThis function allows you to back up the mages (up to 16 pairs of the images captured by each Camera 1 andCamera 2) saved in the PV310 to a Compact Flash memory card. The images saved in Memory 1 and 2 are backedup at a time.Setting Procedure1. Select "CARD" from the menu bar in SETUP mode.The menu is displayed.2. Highlight "Backup".The subwindow appears.If the following message appears, check if the Compact Flash memory card isproperly insertedE0220 CF card not inserted.3. Highlight "Saved Images", press the ENTER key, and specify the number of the folder in which youwant to save the image data (01 to 99).The name of the folder in which image data are saved is preset to "Image", butyou must specify a number followed by the folder name. For example, if a number“01” is assigned to a holder, the folder name will become "Image01" and theimage data file will be stored in the Image01 folder.4. Specify the folder number and press the ENTER key.Backing up the image data starts. When backing up the image data is completed, the backup menudisappears.If the dialog message shown below, the number of the folder specified at step 3 already exists in theCompact Flash memory card. Select "YES" to erase the existing image data together with the folder andnewly save the current image data on the Compact Flash memory card.Data already exists. Overwrite?If the following message shown below appeared, the Compact Flash memory card does not have enoughstorage capacity to save the image. Use a Compact Flash memory card with sufficient storage capacity.E0240 CF memory used up.About File NameThe image data are saved as the following file name under the specified folder in the Compact Flash memory card.Image00 nn m• Image00: Fixed• nn: 01 to 16 (for Image No.)• m: 1 or 2 (for Camera No.)