Panasonic KX-TG9581 Operating Instructions Manual

Contents

Base unit1 MCIDN2 Press MCN to search from the most recent call,or MDN to search from the oldest call.3 To call back, press the desired cellular line key(MCELL 1N to MCELL 4N), then lift the cordedhandset.To exit, press MEXITN.n Using a landlineHandset / Base unit1 Proceed with the operation for your unit.Handset: MCN CIDBase unit: MCIDN2 Press MCN to search from the most recent call,or MDN to search from the oldest call.3 Proceed with the operation for your unit.Handset:– To call back, press M N.– To exit, press MOFFN.Base unit:– To call back, lift the corded handset.– To exit, press MEXITN.Note for handset and base unit:R If the entry has already been viewed oranswered, “ ” is displayed, even if it wasviewed or answered using another unit.R to indicates the caller information wasreceived from the cellular line.R and indicates the caller information wasreceived from the landline.R In step 3, the unit automatically uses the lineyou set in line selection mode (page 18) to callback. When the line selection mode is set to“Auto”, the indicated line ( or ) is used forthe call. If the indicated line is already beingused or you want to select the other line:Handset: Press ML1N or ML2N.Base unit: Press MLINE 1N or MLINE 2N, then liftthe corded handset.Editing a caller’s phone numberYou can edit a phone number in the caller list byremoving its area code and/or the long distancecode “1”.Handset1 MCN CID2 MbN: Select the desired entry.3 MMENUN a MbN: “Edit” a MSELECTN4 Press MEDITN repeatedly until the phonenumber is shown in the desired format.5 Using a cellular line:To make a cellular call, continue from step 3,“Viewing the caller list and calling back”,page 54.Using a landline:Press M N.Base unit1 MCIDN2 MbN: Select the desired entry.3 Press MEDITN repeatedly until the phonenumber is shown in the desired format.4 Using a cellular line:To make a cellular call, continue from step 3,“Viewing the caller list and calling back”,page 54.Using a landline:Lift the corded handset.Note for handset and base unit:R In step 5 on the handset or step 4 on the baseunit, the unit automatically uses the line you setin line selection mode (page 18) to call back.When the line selection mode is set to “Auto”,the indicated line ( or ) is used for the call.If the indicated line is already being used or youwant to select the other line:Handset: Press ML1N or ML2N.Base unit: Press MLINE 1N or MLINE 2N, then liftthe corded handset.Caller ID number auto edit featureHandset / Base unitOnce you call back an edited number, the unitwhich was used to call back remembers the areacode and format of the edited number. The nexttime someone calls from the same area code,caller information is customized by the unit asfollows:– When the call is being received, the Caller IDnumber is displayed in the same format as theedited number.– After the call has ended, the caller’s phonenumber is displayed in the same format as theedited number, when reviewed from the callerlist.For assistance, please visit http://www.panasonic.com/help 55Caller ID ServiceTG958x_0704_ver031.pdf 55 2014/07/04 10:32:28