Panasonic KX-TG9581 Operating Instructions Manual

Contents

unit. This feature allows the base unit to try toreconnect the Bluetooth devices at regularintervals when it returns within base unit range.You can set the interval. The default setting is “1min”.Program this setting using either the base unit orone of the handsets.Important:R When you are using a cellular line or aBluetooth headset, the base unit loses itsconnection from other Bluetooth devices(cellular phone or headset). To automaticallyresume the connection to Bluetooth devices,leave the auto connection on.R Some cellular phones lose connection afterusage, please check the specifications of yourcellular phone for more details.Handset / Base unit1 MMENUN#6322 MbN: Select the desired setting. a MSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNNote:R Some cellular phones may ask you if you acceptthe connection requirement from the base unit.In that case, select “Off” in step 2. Check thespecifications of your cellular phone.Connecting/disconnecting the cellular phonemanuallyIf you will not be using the paired cellular phone’slink to cell feature temporarily (for example, you donot want the unit to ring when your cellular linereceives a call), you can disconnect your cellularphone from the base unit. If you want to use itagain, reconnect the cellular phone to the baseunit.Program this setting using either the base unit orone of the handsets.Note:R After you disconnect a paired cellular phonefrom the base unit manually, it will automaticallybe connected to the base unit in 30 minutes. Ifyou do not use the link to cell feature anymore,unpair the cellular phone (page 20).R A disconnected cellular phone is not unpairedfrom the base unit, so pairing it to the base unitagain is unnecessary.Handset / Base unit1 To connect/disconnect:For CELL 1: MMENUN#6251For CELL 2: MMENUN#6252For CELL 3: MMENUN#6253For CELL 4: MMENUN#6254R A long beep sounds.2 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNCellular line selectionHandsetThis feature determines which cellular line isselected to make cellular calls when you pressMCELLN on the handset.The following settings are available:– “Manual” (default): You can select the desiredcellular line when making a call.– “Cellphone 1”*1: CELL 1 is selected.– “Cellphone 2”*1: CELL 2 is selected.– “Cellphone 3”*1: CELL 3 is selected.– “Cellphone 4”*1: CELL 4 is selected.1 MMENUN#6342 MbN: Select the desired setting. a MSAVEN3 MOFFN*1 After the Bluetooth device is paired, the devicename is displayed.Storing your area code (for dialingonly a 7-digit phone number to makea local call)You need to add your area code when makingcellular calls to a phone number in your area.Once you store your area code, it is automaticallyadded to the beginning of the 7-digit phonenumber when making cellular calls.Program this setting using either the base unit orone of the handsets.Handset / Base unit1 MMENUN#6332 Enter the 3-digit area code.R To correct a digit, press MCLEARN.3 MSAVEN4 Proceed with the operation for your unit.Handset: MOFFNFor assistance, please visit http://www.panasonic.com/help 21Link to CellTG958x_0704_ver031.pdf 21 2014/07/04 10:32:25