Panasonic KX-TDA30 Installation Manual

Also see for HYBRID IP-PBX KX-TDA100: User guide User guide Technical information Technical information Features guide

Contents

Panasonic KX-TDA30 Installation Manual Manual pdf 96 page image

2.4 Installation of the Trunk Cards — KX-TDA100/KX-TDA20096 Installation Manual2.4.10 PRI23 CardFunction1-port ISDN Primary Rate Interface card (23B channels). NI (North American standard ISDNprotocol) compliant.Accessory and User-supplied ItemsAccessory (included): Ferrite core × 1User-supplied (not included): RJ45 connectorNotes• When connecting this optional service card to the trunk, connect through an NT1; donot connect to the U interface of the trunk directly.• When connecting the RJ45 connector, attach the included ferrite core (except inCanada, where the ferrite core is not necessarily required). Refer to "2.2.9 Attachinga Ferrite Core".• This optional service card can be used for either trunk or extension connection, bysetting the A/B switch or using the connector with appropriate pin assignments.• To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.13.1Starting the Hybrid IP-PBX".CAUTIONPRI ports are SELV ports and should only be connected to SELV services.Switch SettingsSwitch Type Usage and Status DefinitionA/B Slide Select A (default) for trunk or B for extension use.LEDsRJ45To NT1/ ExtensionA B