2.9 Connection of 2.4 GHz Portable Stations — KX-TDA100/KX-TDA200164 Installation Manual2.9 Connection of 2.4 GHz Portable Stations —KX-TDA100/KX-TDA2002.9.1 OverviewThe following equipment is required to connect the wireless system:CS: Cell Station (KX-TDA0142/KX-TDA0141)KX-TDA0142 Using a CSIF CardThis unit determines the area covered by the wireless system. Up to 3 calls can be madeat the same time through each CS.• CSIF4 (KX-TDA0143)One CSIF4 card supports up to 4 Cell Stations. Up to 2 CSIF4 cards can beconnected to the KX-TDA100, and up to 4 can be connected to the KX-TDA200.• CSIF8 (KX-TDA0144)One CSIF8 card supports up to 8 Cell Stations. Up to 2 CSIF8 cards can beconnected to the KX-TDA100, and up to 4 can be connected to the KX-TDA200.KX-TDA0141 Using a DHLC/DLC CardThis unit determines the area covered by the wireless system. Up to 2 calls can be madeat the same time through each CS.PS: 2.4 GHz Portable Station (KX-TD7680/KX-TD7690)The KX-TDA100 and KX-TDA200 can support up to 128 PSs. For more details about the PS,refer to the PS Operating Instructions.CAUTION• The CS should be kept free of dust, moisture, high temperature (more than 40 °C),low temperature (less than 0 °C), vibration, and should not be exposed to directsunlight.• The CS should not be placed outdoors (use indoors).• The CS should not be placed near high voltage equipment.• The CS should not be placed on a metal object.• Systems using 2.4 GHz ISM (Industrial, Scientific and Medical) band may interferewith the KX-TDA wireless system. Examples of such systems are cordlesstelephones, wireless LAN, Home RF, microwave ovens and other ISM devices. Thesesystems may cause minor noise.• Keeping some distance between the equipment listed below may preventinterference. (The distance may vary depending on the environment.)Equipment DistanceCS and office equipment such as a computer, telex,fax machine, etc.More than 2 mCS and PS More than 1 mEach PS More than 0.5 mHybrid IP-PBX and CS More than 2 m
