4-6 DSS Console Features4.2 DSS Console FeaturesOne-Touch Access Assignment for System FeaturesYou can assign a desired feature to a DSS or PF button.— Be sure that you are in the Station Programming mode. Set the MEMORY switch to“PROGRAM”.PT and DSS ConsoleEnter the desiredfeature number.feature no.PressAUTO DIAL/STORE.AUTO DIALSTORE[Paired telephone] [Paired telephone]Repeat these stepsto program numbersfor other DSS or PFbuttons.Press the desired DSS button (on the DSSConsole) and dial 2 (on the paired telephone),or press the PF button (on the DSS Console).[DSS Console and Paired telephone]2PF+• If you wish to access the “Paging — All” feature, enterfeature number 33 .— To exit the Station Programming mode, set the MEMORY switch to “SET”.PT and DSS ConsoleDial 95. Enter the desiredextension number(100 through 199).extension no.Press the desiredDSS button.Press AUTO DIAL/STORE.AUTO DIALSTORE[DSS Console] [Paired telephone] [Paired telephone] [Paired telephone]Repeat these stepsto program numbersfor other DSS buttons.9 5— To exit the Station Programming mode, set the MEMORY switch to “SET”.Another Extension Message Waiting Button AssignmentYou can assign a DSS button as an Another Extension Message Waiting button.— Be sure that you are in the Station Programming mode. Set the MEMORY switch to“PROGRAM”.
