DSS Console Features 4-54.2 DSS Console FeaturesPT and DSS ConsoleDial 1. Enter the desiredextension number(100 through 199).1 extension no.Press the desiredDSS button.Press AUTO DIAL/STORE.AUTO DIALSTORE[DSS Console] [Paired telephone] [Paired telephone] [Paired telephone]Repeat these stepsto program numbersfor other DSS buttons.PT and DSS ConsoleEnter the desirednumber.phone no.Press the desired DSS button (on the DSSConsole) and dial 2 (on the paired telephone),or press the PF button (on the DSS Console).PressAUTO DIAL/STORE.AUTO DIALSTORE[DSS Console and Paired telephone] [Paired telephone] [Paired telephone]Repeat these stepsto program numbersfor other DSS or PFbuttons.2PF+One-Touch Dialing AssignmentYou can assign a DSS or PF button as a One-Touch Dialing button. The number can bean extension number or a telephone number. Up to twenty-four digits can be stored ineach memory location.— Be sure that you are in the Station Programming mode. Set the MEMORY switch to“PROGRAM”.• When you assign an outside phone number, you must enter a line access code first.— To exit the Station Programming mode, set the MEMORY switch to “SET”.— To exit the Station Programming mode, set the MEMORY switch to “SET”.Extension Number AssignmentYou can assign a desired number to a DSS button.— Be sure that you are in the Station Programming mode. Set the MEMORY switch to“PROGRAM”.
