Telephone Features 3-833.2 Telephone Features MMessage WaitingWhen the called extension is busy or does not answer your call, you can leave anotification so that the called party may call you back.As a message receiver, the MESSAGE button light lets you know that a call has beenreceived. If you receive notification, you can call back the original party by a simpleoperation. This operation is available only for proprietary telephones with MESSAGEbuttons.SettingAny TelephoneDial 701. Enter the extension number(100 through 199) wherethe message will be left.Dial #.7 0 1 #extension no.Lift the handset or pressSP-PHONE/MONITOR.Hang up or pressSP-PHONE/MONITOR.Confirmationtone anddial tonePTPress MESSAGE. Hang up or pressSP-PHONE/MONITOR.MESSAGEConfirmation toneand dial toneIf the called extension is busy or does not answerAny TelephoneDial 702. Enter the extension number(100 through 199) whereyou left a message.Dial #.7 0 2 extension no.Lift the handset or pressSP-PHONE/MONITOR.Hang up or pressSP-PHONE/MONITOR.Confirmationtone anddial tone#Canceling• Single line telephone users can dial “0” instead of “#”.• Single line telephone users can dial “0” instead of “#”.
