3-116 Telephone FeaturesS 3.2 Telephone FeaturesConditions• System Speed Dial numbers must be stored by System Programming.• “Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.• You may press a CO button or dial a line access code to select a desired outside (CO)line before pressing the AUTO DIAL/STORE button or dialing *.• It is possible to change toll restriction COS number with this feature (Toll Restrictionfor System Speed Dialing). In this case, System Programming is necessary.• A System Speed Dial number can be divided when stored.If the number is divided and stored in System Speed Dial numbers 01 and 02,press: [AUTO DIAL/STORE] [0] [1] [AUTO DIAL/STORE] [0] [2].• The dialed number appears on the display.• A rotary telephone cannot use this feature.Programming References• System Programming — Installation Manual[001] System Speed Dialing Entry[301] Toll Restriction — System Speed Dialing Boundary ClassFeature ReferenceToll Restriction for System Speed DialingPTPTPTSystem Speed DialingAllows you to make a call using pre-programmed speed dial numbers. This systemsupports one hundred speed dial numbers which are available to all extension users.PT and SLTLift the handset or pressSP-PHONE/MONITOR.system speed dial no.Enter a system speed dial number(00 through 99).AUTO DIALSTOREFor a PTFor an SLTFor a PT: Press AUTO DIAL/STORE.For an SLT: Dial .• You will not hear a tone.• The AUTO DIAL/STORE indicator lights.• The AUTO DIAL/STORE indicatorlight turns off.
