49Installing YourMachineSetting the Internet ParametersBefore starting, you will need a completed copy of page 19 (Pre Installation Information). For your machineto be able to operate on the Network properly, the following five (5) Basic Parameters must be pre-programmed into the machine.• IP Address• Subnet Mask• Default Gateway IP Address• SMTP Server Name or IP Address• Email AddressNote: If DHCP server is available on your network, the IP Address, Subnet Mask and Default GatewayIP Address will be acquired automatically.NOTE 1. To scroll the display to desired User Parameter in Step 3, press or .2. If the DNS Server is not available, change the setting of the Fax Parameter No. 161 (DNSSERVER) to "Invalid", then enter the IP Address instead.3. For convenience, you can use to enter a period "." while programming IP Addresses only.Otherwise is used to enter an asterisk under other conditions.Setting the User (Internet) Parameters1 SET MODE (1-8)ENTER NO. OR ∨ ∧2 1:USER PARAMETERS?PRESS SET TO SELECT3repeatedly until display shows;IP ADDRESS❚4 Enter the IP Address using the keypad. Press orto enter the period ".". (See Note 3)Ex:IP ADDRESS123.178.240.3❚5To continue setting other parameters, or pressto return to standby.SUBNET MASK❚711 2 3 1 7 8 2 4 0 3STOP
