Panasonic DX-600 Network Fax Manual

Also see for DX-600: Technical guide Service manual

Contents

Polling140In order to let other stations poll your machine, you must prepare your machine with a document stored inmemory. Be sure to set the polling password before storing the document into memory. After being polled,the documents stored in the memory will be erased automatically. To retain the documents in memory sothat they can be polled repeatedly change Fax Parameter No. 27 (POLLED FILE SAVE) to "Valid".NOTE 1. You can still send or receive documents even when set to be polled.2. Only 1 polled file can be stored in memory. If you need to add document(s) into the samepolled file, see page 166.3. If you have set the polling password in Fax Parameter No. 26, the password will appear on thedisplay.You can still change the password temporarily by overwriting it with a new one.Preparing to be Polled1 Set document(s) face down.ENTER STATION(S)THEN PRESS START 00%2 POLLING NO.=❚1:POLLING 2:POLLED3 POLLEDPASSWORD=12344 Enter a 4-digit polling password. (See Note 3)Ex:POLLEDPASSWORD=43215The document(s) will be stored into memory.* STORE * NO.015PAGES=001 01%* STORE * COMPLETEDTOTAL PAGES=005 24%324 3 2 1