Sending Documents via Telephone Line110Memory TransmissionMulti-Station Transmission (Broadcasting)If you have to send the same document(s) to multiple stations, you can save time in feeding thedocument(s) by using memory transmission. That is, you can store the document(s) into memory and thensend it to the station(s) automatically.NOTE 1. You can review the stations you entered in step 3 before storing your document into memoryby pressing or . Press to clear an entered station or group shown on thedisplay if needed.2. The “Quick Memory Transmission” is disabled if multiple stations are set.1 Set document(s) face down.ENTER STATION(S)THEN PRESS START 00%2 Dial by any combination of the following methods:• One-Touch Dialling• Abbreviated Dialling• Manual Number Dialling, press after eachstation is entered(Up to 70 stations)• Directory Search Dialling, press after eachstation is entered(For details, see page 107 to 109.)Ex:• If you want to confirm the number of stations you haveentered, press .<01>(Station name)5551234[010](Station name)55534562 STN(S) ARE SETADD MORE OR START3The document is stored into memory with a file number.Then starts dialling the telephone numbers in sequence.* STORE * NO.001PAGES=001 01%* STORE * COMPLETEDTOTAL PAGE=005 25%* DIALLING * NO.001(Station name)SETSET0 1 0SETCLEAR
