219Chapter 9 Solving Problems726 Received an error responsefrom the DNS server.Check the POP server name.Check the SMTP server name.OperatingInstructions (ForAdministratorSetup)727 Communication error occurredwhile communicating withremote station.Check the remote station.728 Communication error occurredwith the SMTP Directtransmission.Check the remote station.729 Failed to authenticate (SMTPAuthentication) when connectingwith the SMTP server.Check the SMTP authentication user nameand password.Contact the network administrator.OperatingInstructions (ForFunctionParameters)730 Cannot retrieve the Journal orprogram the Internet Parametersand the Auto Dialer remotely viaEmail from a PC.Check that the Fax Parameter “158 PCRemote Update” is set to “Valid”.OperatingInstructions (ForFunctionParameters)731 The dialer buffer for manualdialing was full (70 stations)when the Relay transmissionrequest was received.Request the originator to re-send the Relaytransmission request after the reservedcommunication is finished.734 Internet Fax communicationsand POP reception functions aredisabled.Contact the device administrator.800/814/816/825Unit was requested to relay adocument or ConfidentialCommunication but has nocapability.Check with the other party.815 Mailbox is full. Delete confidential documents. Deleting aConfidentialDocument (Seepage 74)826 The received sub-address is notpre-programmed in the AddressBook.Check entries in the Address Book.Check the entry of the sub-address of theremote station.Address Book(See page 176)850 The Relay transmission wascanceled at a relay stationbecause the Relay XMTpasswords did not match.Check the password. OperatingInstructions (ForFunctionParameters)870 Memory overflow occurred whilestoring documents into memoryfor transmission.Transmit documents without storing intomemory.Add SD Memory Card in the machine.DirectTransmission(See page 48)Info. Code Problem Action Refer to
