164Chapter 5 Internet FaxResult of Relayed TransmissionWhen the Relayed Transmission feature is used, two reports as described below are transmitted fromthe relay station to the initial sending station, and administrator’s computer confirming the results of aRelayed transmission. Relayed Transmission Report (communication journal)When a relay station completes a Relayed transmission, it transmits a Relayed Transmission Report(Communication Journal) to the initial sending station to report the relay result.The Relayed Transmission Report (Communication Journal) is transmitted when the FunctionParameter “143 Relay XMT Report” has been set to “Always” or “Inc Only”.No. Item Explanation(1) Indication ofcommunication modeIndication of communication mode(2) Start time ofcommunicationStart time of communication(3) End time ofcommunicationEnd time of communication(4) File number 001 to 999 (When the communication is stored into the memory, a filenumber is assigned for each communication.)(5) Station number Sequential number of the stations(6) Communication result Communication result“R-OK” indicates that the Relayed XMT Request was successful.“3-digit Info Code” indicates that the communication has failed.(7) Key name or mark mark indicates dialing by direct number dialing.(8) Recorded name in theAddress Book, directdialing number, or EmailaddressRecorded name in the Address Book, direct dialing number, or Email address************** - Comm. Journal - ******************* Date MMM-dd-yyyy ***** Time 15:00 ********(1) (2) (3)Mode = Relayed Transmission Start=MMM-dd 15:00 End=MMM-dd 15:00File No.= 050 (4)(5) (6) (7) (8) (9) (10)STN Comm. Key Name Station Name/Email Address/Telephone No. Pages DurationNo.001 R-OK [STOCKHOLM ] STOCKHOLM 001/001 00:00:15002 R-OK [ROME ] ROME 001/001 00:00:15- PANASONIC -*****DP-xxxxx************************** - HEAD OFFICE - ****** - 201 555 1212 - **********
