TQBS0291 9SettingsBefore use, perform the initial setup of the unit.PreparationTurn on the TV, then select the appropriate AVinput to suit the connections to this unit.1 Press [Í] on the remote control or [Í/I] onthis unit.2 Follow the on-screen instructions to continuewith the settings.• For details about “PIN Entry” (> 55)3 Auto Setup will start automatically.• If the clock setting screen appears, set thetime manually (> 55, Clock).• When connected to a 4K compatible TV(> right)4 Set Quick Start to “On”, “Off” or “TimerSetting for Quick Start”, then press [OK].When “Easy Setting has been completed.”appears, Easy Setting is completed.• Select “Yes” to proceed to Easy NetworkSetting.• Select “No” to finish the Easy Setting.To restart setup (> 48, Auto Setup)To view the list of tuned channels(> 11, Using Channel List)To stop partwayPress [RETURN ].• If tuning is cancelled partway through, it may not bepossible to receive the channels. Restart setup again.When connected to a 4K compatible TV,connection setting to 4K TV below is displayed.The screen above does not appear for a non-4Kcompatible TV.1 Press [OK] to start the setting.A black screen appears for a few seconds andthen a message appears.2 Select “Yes” and press [OK].Connection to 4K TV is successful.(Go to next step of “Easy Setting”.)When the following screen appears:“Yes”: Next setting is displayed.“No”: Connection setting to 4K TV starts again.(Retry the setup process.)• To reconnect this unit to a 4K-compatible TV afterconnecting this unit to a 2K-compatible TV and completing“Easy Setting”, set “4K(50p/60p) Output” to “4K(50p/60p)4:4:4” or “4K(50p/60p) 4:2:0”. (> 52)Easy SettingWhen connected to a 4K compatible TV4K(50p/60p) OutputStart connection check with your 4K TV.Once connection check is started and if the video is not displayedcorrectly, please wait for the next display. The connection checkcould take up to 30 seconds to display the new message screen.Press OK.OKRETURN4K(50p/60p) OutputIs this message displayed correctly ?OKRETURNYes No4K(50p/60p) OutputConnection check is finished.Cannot connect with 4K.Please check if the HDMI connecteddevice and cable are compatible with 4K.Move on to the next setting ?Select “Yes” for the next setting.Select “No” to set again.OKRETURNYes No