Panasonic DMR-UBT1 Operating Instructions Manual

Also see for DMR-UBT1: Operating instructions Operating instructions

Panasonic DMR-UBT1 Operating Instructions Manual Manual pdf 13 page image

TQBS0291 13You can rewind/pause the live TV programme youare watching.• A maximum of 1.5 hours of TV programmes canbe saved temporary.1 While watching TVPress [6] to rewind.2 Press [1 a1.3] to playback.1 While watching TVPress [;] to pause.2 Press [1 a1.3] to playback.To stop REWIND LIVE TV or PAUSE LIVE TV1 Press [∫].2 Select “Yes”, then press [OK].• REWIND LIVE TV/PAUSE LIVE TV stops in the followingcases:– When switching to other channels or other screen– When the unit has started recording using all tuners• These functions do not work in the following cases:– While watching a programme being recorded– When a radio programme is selectedYou can switch to the channel you havepreviously watched.Press [LAST VIEW ].Press [RADIO/TV].Refer to “Update Channel List”. (> 48)Recording TVprogrammesThis unit can record two programmes beingbroadcasted at the same time.To record two programmes simultaneouslyWhile recording, perform steps 1–3. (> above)To delete recorded programmes (> 32)• If a timer recording reaches its start time when all tunersare being used for recording, the recording (OTR) of one ofthe programmes terminates.• When “Automatic Standby after OTR” is set to “On”, refer topage 54.• Recording UHD/HDR programmesThis unit can record UHD/HDR programmes.UHD (4K) programmes are significantly larger than HD (2K)programmes in data size. If you keep recording UHD (4K)programmes, free space on the HDD may be used upquickly. Before this happens, however, you can copy themto an external USB HDD.– You can save them to a disc with HD (2K) quality. (> 35)REWIND LIVE TV/PAUSE LIVE TVREWIND LIVE TVPAUSE LIVE TVOther operationsLAST VIEWTo switch to the radio channels or to the allchannelsTo update the channel listPreparationYou can change the recording mode (picturequality) (> 14)1 Select the channel to record.2 Press [REC ¥].Recording will start.3 Select “Automatic Stop”, then press[OK].• One touch recording (OTR)Recording stops automatically when theprogramme ends.Recording