Panasonic DMR-UBT1 Operating Instructions Manual

Also see for DMR-UBT1: Operating instructions Operating instructions

Panasonic DMR-UBT1 Operating Instructions Manual Manual pdf 45 page image

TQBS0291 45VIERA LinkWhat is VIERA Link?VIERA Link is a convenient function which will linkthe operations of this unit and a Panasonic TV(VIERA) or an amplifier/receiver. You can use thisfunction by connecting the equipment with theHDMI cable. See the operating instructions forconnected equipment.You can operate this unit using the TV remotecontrol.The input channel of the TV will be automaticallyswitched and the screen of this unit will bedisplayed. Additionally when the TV is off, the TVwill automatically turn on.– When play starts or when Video Menu etc, isperformedWhen you set the TV to standby, this unit is alsoautomatically set to standby.• Power off link function does not work whenrecording, copying etc.When the unit is directly connected to anamplifier/receiver.1 While playing musicPress [OPTION].2 Select “TV Power Off”, then press [OK].• These functions may not work depending on the equipmentcondition.• Use the remote control supplied with this unit if you cannotoperate this unit using buttons on the TV remote control.• The information provided on this page is correct as ofAugust 2018 and is subject to change.Software (Firmware)UpdateWhen the “Terms and Conditions of Use / PrivacyPolicy” is displayed (> 54, Legal Notices)Software of this unit can be updated automaticallyby the following methods at the specified time.• From broadcasts• From InternetNetwork connection is required.If a software (firmware) update is available, anotification is displayed.To update the software (firmware) immediately(> 55)• It may take up to a few hours until the update is completeddepending on the network or broadcast environment.• You can also download the latest software (firmware) fromthe following website.http://panasonic.jp/support/global/cs/Easy control only with Panasonic TV’sremote controlAutomatic input switchingPower off linkPlaying music continuously even afterturning off power to the TVOtherfunctionsYou cannot operate the unit until the updateis complete. Don’t remove the AC mains leadduring the update. Removing the AC mainslead while the update is in progress maydamage the unit.Update software (firmware) of this unitNew software version has been found.The software will be updated automaticallyafter this unit is switched to standby.Do not disconnect the AC mains lead.