Panasonic DMR-UBT1 Operating Instructions Manual

Also see for DMR-UBT1: Operating instructions Operating instructions

Panasonic DMR-UBT1 Operating Instructions Manual Manual pdf 48 page image

TQBS029148Basic SettingsYou can change the unit’s settings below.1 Press [FUNCTION MENU].2 Select “Basic Settings” in “Setup”, then press[OK].3 Select the menu, then press [OK].4 Select the item, then make the setting.To return to the previous screenPress [RETURN ].DVB TuningFavourites EditYou can create four favourites of channels formaking viewing and recording easier.After editing as follows, save the Favourites.Press [RETURN ], then press [OK].• To select the other Favourites list:Press the green button.• To add channels to the Favourites list:Select the channel in the “All DVB Channels”column, then press [OK]. Repeat this step.• Red: Change the sorting mode.• Yellow: Add continuous block of channels tothe list at once.• Press [3, 4] to make the block, then press[OK].• Blue: Select the Category.• To change the order of the channels list:1 Select the channel to move, press the greenbutton.2 Select the new position, then press thegreen button.SetupBasic SettingsOKRETURNDVB TuningHDD / Disc / USB HDDPictureSoundDisplayConnectionNetworkOthers• To delete channels:Select the channel, press [OK].• Yellow: Delete all channels.• To change the name of the Favourites list:1 Press the red button.2 Press [3, 4, 2, 1] to select a character,then press [OK].Repeat this step to enter other characters.• Red: Delete a character.• Blue: Delete all characters.3 Press [RETURN ].Channel ListYou can edit the channel list.• To hide unwanted channels1 Select the channel.2 Press [OK].The check mark is removed.• Red: Change the sorting mode.[alphabetical order (A. B. C...) etc.]• Yellow: Reveal all channels.• Blue: Change the Category.• To move the channel number assignment1 Select the channel to move, then press thegreen button.2 Enter the channel number to reassign withthe number buttons.3 Press [OK].Auto SetupYou can restart the Auto Setup. (> 9)Select “Yes”, then press [OK].• The timer recording programmes are cancelled.Manual TuningYou can add new channels manually.1 Press [3, 4] to select the physical channel.• Adjust the frequency by checking the signalstrength and signal quality.2 Press [OK] to start scan.• The set channel is displayed in the table.Update Channel ListYou can update the channel list to the latest one.