Panasonic DMR-UBT1 Operating Instructions Manual

Also see for DMR-UBT1: Operating instructions Operating instructions

Panasonic DMR-UBT1 Operating Instructions Manual Manual pdf 71 page image

SetupTQBS0146 71Basic SettingsYou can change the unit’s settings of Digital TVTuning, Sound, Display, Connection, Network etc.in the menu.1 Press [FUNCTION MENU].2 Select “Basic Settings” in “Setup”, then press[OK].3 Select the menu, then press [OK].4 Select the item, then make the setting.To return to the previous screenPress [RETURN ].Digital TV TuningFavourites EditYou can create four favourites of channels formaking viewing and recording easier.After editing as follows, save the Favourites.Press [RETURN ], then press [OK].• To select the other Favourites list:Press the green button.• To add channels to the Favourites list:Select the channel in the “All Digital Channels”column, then press [OK]. Repeat this step.• Yellow: Add all the available channels to theFavourites. (This function is available onlywhen there are no channels in the“Favourites”.)• To change the order of the channels list:1 Select the channel in the “Favourites”column to move, then press the greenbutton.2 Select the new position, then press thegreen button.SetupBasic SettingsOKRETURNDigital TV TuningHDD / Disc / USB HDDPictureSoundDisplayConnectionNetworkOthers• To delete channels:Select the channel in the “Favourites” column,then press [OK].• Yellow: Delete all channels.• To change the name of the Favourites list:1 Press the red button in the “Favourites”column.2 Press [3, 4, 2, 1] to select a character,then press [OK].Repeat this step to enter other characters.• Red: Delete a character.• Blue: Delete all characters.3 Press [RETURN ].Channel ListYou can edit the channel list.• To hide unwanted channels1 Select the channel.2 Press [OK].The check mark is removed.• Yellow: Reveal all channels.• To change the channel number assignment1 Select the channel to change, then press thegreen button.2 Enter the channel number to reassign withthe number buttons.3 Press [OK].• To set the channel manually1 Press the red button.2 Refer to “Manual Tuning”. (> below)Auto SetupYou can restart the Auto Setup. (> 12)Select “Yes”, then press [OK].• The timer recording programmes are cancelled.Manual TuningYou can add new channels manually.1 Press [3, 4] to select the physical channel.• Adjust the frequency by checking the signalstrength and signal quality displays.2 Press [OK] to start scan.• The set channel is displayed in the table.Update Channel ListYou can update the channel list to the latest one.