Panasonic DMR-UBT1 Operating Instructions Manual

Also see for DMR-UBT1: Operating instructions Operating instructions

Panasonic DMR-UBT1 Operating Instructions Manual Manual pdf 68 page image

Other functionsTQBS014668Software (Firmware)UpdateSoftware of this unit can be updated automaticallyby the following methods at the specified time.• From InternetNetwork connection and setting are required.(> 12, 14)If a software (firmware) update is available, anotification is displayed.• It is displayed on the Channel Information(> 22) when the Software (Firmware) can beupdated immediately.To execute, press the red button while theChannel Information is displayed, and follow theinstructions on the screen.Update of the software (firmware) will start whenthe unit is turned to standby mode.Use the “Software Update Now ( Internet )”function. (> 80)Other operations[BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW][SD]1 Press [FUNCTION MENU].2 Select “Media”, then press [OK].[BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]This function is to name a disc.Refer to “Entering text”. (> 70)• The disc name is displayed in the Blu-ray DiscManagement/DVD Management window.• [DVD-R] [DVD-RW] [+R] With a finalised disc, thename is displayed on the Top Menu.• [+RW] The disc name is displayed only if youplay the disc on other equipment after creatingTop Menu.• Do not perform this operation before copying HD Video(AVCHD) to DVD-R or DVD-R DL. (> 56)[BD-RE] [BD-R] [RAM]Select “Yes”, then press [OK].e.g.,• To release the protectionRepeat the same steps.• The screen icon will be switched to “Off”.You cannot operate the unit until the updateis complete. Don’t remove the AC mains leadduring the update. Removing the AC mainslead while the update is in progress maydamage the unit.Update software (firmware) of this unitTo update the software (firmware) immediately• It may take up to a few hours until the update is completeddepending on the network environment.• The timer recording always takes preference over thesoftware (firmware) download; if the timer recording isscheduled to start, the downloading will be performed at thenext opportunity.• You can also download the latest software (firmware) fromthe following website.http://panasonic.jp/support/global/cs/New software version has been found.The software will be updated automaticallyafter this unit is switched to standby.Do not disconnect the AC mains lead.XXXXXX1NowDolby DRating: GChange categoryAll Digital ChannelsNEWSXXXXX - XXXXXSoftware updatee.g.,Media management3 Select the media, then press [OK].4 Select the management item, then press[OK].• Selectable items will change depending onthe selected item and inserted media.Disc NameDisc ProtectionOnDisc NameDelete all programmesDisc Protection