Panasonic DMR-UBT1 Operating Instructions Manual

Also see for DMR-UBT1: Operating instructions Operating instructions

Panasonic DMR-UBT1 Operating Instructions Manual Manual pdf 12 page image

Getting startedTQBS014612When this unit is connected to the network, youcan enjoy network functions (Ultra HD Blu-rayPlayback, DLNA function, Network Service, TVAnytime, etc.).For details about connection method, refer to theinstructions supplied with the connectedequipment.• Use category 5 or above straight LAN cables (STP) whenconnecting to peripheral devices.About wireless LAN connection (> 14, EasyNetwork Setting)• The unit is not compatible with public wireless LANservices.SettingsBefore use, perform the initial setup of the unit.1 Turn on the TV, then select the appropriateAV input to suit the connections to this unit.2 Press [Í] on the remote control or touch[Í/I] on this unit.• The Easy Setting will start at the initial power on.• The “Region Selection” will appear. Select the regionyou live in, and press [OK].3 Follow the on-screen instructions andperform the settings.Auto Setup starts.(This operation may take some time.)e.g.,4 Clock is set automatically.If the clock setting screen appears, set thetime manually. (> 80, Clock)5 Set the connection setting for the 4K TV.When connected to a 4K (50p or60p)-compatible TV, connection setting to 4KTV below is displayed.The screen above does not appear for anon-4K compatible TV. Proceed to Step 6.1 Press [OK] to start the setting.A black screen appears for a few secondsand then a message appears.Network connectionAfter you make the LAN cable/Wireless LANconnection, the network setting is needed.(> 14, Easy Network Setting)LAN cable connectionWireless LAN connectionBroadbandrouter, etc. InternetLAN (ethernet)cableEasy SettingProgressDigital TV Auto TuningCH 6 69RF ChDigital TV: 2SearchingQualityTypeChannel NameThis will take about 3 minutes.35 101035Digital TVDigital TV4K(50p/60p) OutputStart connection check with your 4K TV.Once connection check is started and if the video is not displayedcorrectly, please wait for the next display. The connection checkcould take up to 30 seconds to display the new message screen.Press OK.OKRETURN