8 SQT0080Control reference guideWhen other Panasonic devices respond to theremote control of the unit, change the remotecontrol code. (> 28)1 Turn the unit on and off2 TV operation buttonsYou can operate the Panasonic TV using thisunit’s remote control. Some buttons may notwork depending on the TV.[Í TV] : Turn the TV on and off[AV] : Change input[i j VOL] : Adjust the volume3 Select title numbers, etc./Enter numbers orcharacters4 Cancel5 Basic playback control buttons (> 17)6 Show Closed Caption setup screen(> 23, 26)7 Show Pop-up menu/Top menu (> 17)8 Show Option menu (> 22)9 Colored buttons (red, green, yellow, blue)Used for various purposes depending on thedisplay.10 Transmit the remote control signal11 Open or close the disc tray (> 14)12 Show the status messages (> 18)13 Switch Secondary Video on/off(Picture-in-picture) (> 23)14 Change audio (> 17)15 Show Miracast TM screen (> 20)16 Show the Home Screen of Network Service(> 19)17 Exit the Menu screen18 Show Netflix screen (> 19)19 Show HOME menu (> 15)20 [3, 4, 2, 1] : Move the highlight for selection[OK] : Confirm the selection(;1) : Frame-by-frame (> 17)21 Return to previous screen1 Disc tray (> 14)2 Remote control signal sensorDistance: Within approx. 7 m (23 feet)Angle: Approx. 20e up and down, 30e left and right3 [BDT460] [BDT361/360_for_U.S.A.]Blue LEDIt is possible to set the LED to turn on/off. (> 28)4 SD card slot (> 14)5 [BDT460] V.OFF LED (Video off LED)It is possible to set the LED to turn on/off. (> 28)6 USB port (> 14)7 Display8 Open or close the disc tray (> 14)9 Basic playback control switches (> 17)10 Standby/on switch (Í/I) (> 12)Press to switch the unit from on to standbymode or vice versa. In standby mode, the unitstill consumes a small amount of power.Rear panel terminals (> 9–11)123546720892119171618151413121110SD CARD108 91 2 43 5 6 7Pull to flip downthe front panel.