Panasonic CT10R11 Operating Instructions Manual

Contents

Panasonic CT10R11 Operating Instructions Manual Manual pdf 7 page image

Control Operation(_ Power ButtonPress the POWER button to turn ON. Press again to turn OFF. Channel and volume level will be the same as when lastturned off. Channel number and time (when clock is set) will be displayed when the Receiver is first turned on.(_ Vol (Volume) Buttons@IIIIIIPress the VOL (VOLUME) • button to increase volume or press the VOL (VOLUME) •button to decrease volume. An On-Screen display will indicate volume level.Level (+) and (-) ButtonsThe LEVEL buttons are used in conjunction with the Video, Set Up and On Timer Menus. Once a display is On Screen theLEVEL (+) and (-) buttons are used to make the desired adjustment.Ch (Channel) ButtonsPress the CH (CHANNEL) • or • buttons to sequentially select only those channels programmed in memory. Channelnumber and time (when clock is set) will display for each channel selected.Clock(if set) -----II "2:45 PM Green indicates channel is programmedCH 039 I--- into channel memory.The TV/VIDEO button must be set to the TV position.Q• The TV/ANT-CABLE Menu must be set for the type of signal at the antenna input. Select TV/ANT for off air signals orCABLE for cable signals.• All channels will be available when there are no channels programmed in memory (indicated by Yellow channelnumbers).• Only programmed channels will be selected when two or more channels are programmed in memory (indicated byGreen channel numbers).• Non-programmed channels can be selected anytime with the Remote Control Keyboard "0"-"9" buttons.C) Set Up ButtonThe SET UP button is used to display a number of On Screen Set Up Menus that allow the viewer to select the followingfeatures:• Auto Channel Programming• Program Channel Memory• Select TV/ANT or Cable Tuning System• Set ClockAUTO CH -P" OH 05 -D-TV/ANTNOTE: Prolonged power interruption will result in the loss of Set Up feature adjustments.-7-