Panasonic CT10R11 Operating Instructions Manual

Contents

Panasonic CT10R11 Operating Instructions Manual Manual pdf 11 page image

Sleep ButtonThis feature automatically shuts off power after a predetermined time lapse of 30, 60 or 90 minutes.1. Press the SLEEP button once to set the Sleep Timer for 30 minutes as displayed On Screen.2. Press the SLEEP button twice to set the Sleep Timer for 60 minutes as displayed On Screen.,'3. Press the SLEEP button three times to set the Sleep Timer for 90 minutes as displayed On Screen.4. Press the SLEEP button continuously until the display reads 0 to deactivate the Sleep Timer.Display will flash 3, 2 and 1 to indicate the last three remaining minutes priorto turn off. This allows the viewer to resetor deactivate this function before shut off.. After Sleep Timer is set, use the RECALL button to find out the time that remains prior to automatic turn off. A press ofthe SLEEP button while Sleep Timer function is active will reset the timer clock to the next higher 30 minute interval.Recall ButtonA press of this button will display the following:CIockor Time remaining _ =,2:45 PMbefore Sleep Timer feature 20activation (If set).CH 03-91- Channel Number SelectedChannel Keyboard "0 through 9" ButtonsPress two keys to access any programmed or unprogrammed channel. Example: "0" and "5" for channel 5., Audio will mute when a channel with weak or no signal is selected.• Second number must be pressed within 2 seconds of the first entry or channel will change to that of the first numberentered.• The current channel will remain on when an invalid channel number is entered. (Example: Channel 70 while in theTV/ANT mode).• The RECALL button may be used at anytime to display the current channel.Mute ButtonPress the MUTE button to mute sound immediately. "MUTE" will display for a few seconds. Press again and sou nd will berestored to same level as before muting. Display of volume level adjustment will appear.Skip ButtonThis feature allows the viewer to temporarily select other channels and automatically returns to the original channel after apredetermined time period.Ch 021. Press SKIP button.Once for 30 seconds.v_"/_. Twice for 60 seconds.Three times for 90 seconds.Four times to deactivate feature.2. Select any other channelor channels.3. Channel number disap- 4. Automatically returns topears, then Skip "13mer original channel whenwill appear and count time elapses.down.-11 -