Panasonic CT-2701 Owner's Manual

Contents

Panasonic CT-2701 Owner's Manual Manual pdf 8 page image

8TO MEMORIZE CHANNELSThis TV is equipped with a channel memory feature whichallows channels to skip up or down to the next channel set intomemory, skipping over unwanted channels.Before selecting channels, they must be programmed into theTV's memory. In addition to normal VHF and UHF channels,this TV can receive up to 113 Cable TV channels. To use thisTV with an antenna, set the TV/CATV menu option to the TVsetting. When shipped from the factory, this menu option is inthe CATV setting.TV/CATV SELECTIONPress t to select MODE mode andthen press . Then press or toselect the TV or CABLE mode, thenpress ACTION.Press ACTION twice.123Press ACTION and press toselect the SET UP mode, then pressACTION.NOTE:Contact your cable company to determine the type of cable systemused in your area.SET UPLANGUAGE/IDIOMA/LANGUEAUTO PROGRAMMANUAL PROGRAMCC/ACTION: OFF/MODE : TV CABLEPICTURELOCKEXITTIMERSET UPAUDIOAUTOMATIC CHANNEL MEMORYPress ACTION and press toselect the SET UP mode, thenpress ACTION.Press t twice to select AUTOPROGRAM mode and then press. The TV will begin memorizing allthe channels available in your area.Press ACTION twice.123SET UPLANGUAGE/IDIOMA/LANGUEMODEAUTO PROGRAMMANUAL PROGRAMCC/ACTION: CABLE: OFF/ /PICTURELOCKEXITTIMERSET UPAUDIO12MANUAL CHANNEL MEMORYPress ACTION and press to selectthe SET UP mode, then pressACTION.Press s twice to select MANUALPROGRAM mode and then press .Select the desired channels to beadded or deleted using DirectChannel Selection (10 keys. 0-9),CH s or t.Press or to select ADD orDELETE.If an unmemorized channel wasselected (step 3), the channelindicator will be yellow. Press orif you wish to ADD theunmemorized channel. The channelindicator will change from yellow toblue when a channel is added andthe channel will be memorized.If a memorized channel was selected (step 3), the channelindicator will be blue.Press or if you wish to DELETE the channel frommemory. The channel indicator will change from blue to yellowwhen a channel is deleted.Repeat Steps 3 and 4 for each channel to be added ordeleted.Press ACTION three times.453ADD CH 012SET UPLANGUAGE/IDIOMA/LANGUEMODEAUTO PROGRAMMANUAL PROGRAMCC/ACTION: CABLE: OFF/ /SETTING TIMERYou can set the TV to turn off after a preset amount time.Press ACTION and press to select the TIMER mode, then press ACTION.Press and then press or to select desired time, then press ACTION.12TIMERSLEEP/ACTION/: 10After the timer is programmed, the display will disappear then reappear momentarily every ten minutes to remind you the timer function isoperating.To confirm the timer setting, repeat step 1. The remaining time will be displayed.To cancel the timer setting, select the OFF.PICTURELOCKEXITTIMERSET UPAUDIO