Panasonic CT-2701 Owner's Manual

Contents

Panasonic CT-2701 Owner's Manual Manual pdf 5 page image

5ENGLISHREMOTE CONTROLCHVOLVOLCHRECALLTV/VIDEOMUTER-TUNEPOWER123678945Remote controlPart No. EUR77130201. POWER - Press to turn the TV on. Press again to turn theTV off.2. ACTION - Press to display the On-screen menu function.And also, press to enter or select information for On-Screenoperations.3. VOL (VOLUME) / - Press to increase, or todecrease the volume level. And also, press to select thedesired setting during On-Screen operations.4. MUTE - To turn off the sound, press this button once. TheTV will be silenced and the symbol "MUTE" will appear onthe screen. The muting feature can be released by pressingMUTE again or one of the VOL or .5. Direct Channel Selection (0-9) - Allows direct access toany channel.6. R-TUNE - This button allows you to go back to the previouschannel selected by just pressing R-TUNE. Press this buttonagain to return to the channel you were watching.7. CH (CHANNEL) / - Press to change to a higher num-bered channel set into memory. Press to change to a lowernumbered channel set into memory. And also, press to selectthe desired setting during On-Screen operations.8. TV/VIDEO - Switches between TV and external input.9. RECALL - When you press this button, the channel numberwill appear in the upper right corner of the screen. Press thebutton again to remove display from the screen.Before using the remote control transmitter, batteries must first be installed.2. Install two "AA" (penlight size) batteries.3. Replace the battery compartment cover.Use two "AA" size penlight batteries (supplied) for thetransmitter. The batteries may last approximately one yeardepending on how much the remote control is used. For bestperformance, it is recommended that batteries should be replacedon a yearly basis, or when the remote operation becomes erratic.Do not mix old and new batteries or different types.BATTERY PRECAUTIONSThese precautions should be followed when using batteries inthis device:1. Use only the size and type of batteries specified.2. Be sure to follow the correct polarity when installing thebatteries as indicated in the battery compartment. Reversedbatteries may cause damage to the device.3. Do not mix different types of batteries together (e.g. Alkalineand Carbon-zinc) or old batteries with fresh ones.4. If the device is not to be used for a long period of time,remove the batteries to prevent damage or injury frompossible battery leakage.5. Do not try to recharge batteries not intended to be recharged;they can overheat and rupture.(Follow battery manufacturer's directions.)1. Slide the battery compartment cover.HOW TO INSTALL BATTERIESTO USE AC POWER SOURCEUse the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.POWER SOURCENOTES:1. Never connect the AC line cord plug to other than the specified voltage (120V 60Hz).Use the attached power cord only.2. If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to fileor cut the blade. It is the user's responsibility to have an electrician replace the obsoleteoutlet.3. If you cause a static discharge when touching the unit, and the unit fails to function,simply unplug the unit from the AC outlet, wait a few minutes, and plug it back in.The unit should return to normal operation.Wider Holeand BladeAC outletPolarized AC Cord Plug(One blade is wider thanthe other)