Panasonic CT-2701 Owner's Manual

Contents

Panasonic CT-2701 Owner's Manual Manual pdf 11 page image

11ENGLISHVHF 2-13UHF 14-69CATV 1-12575 Ohm (VHF/UHF/CATV) Coaxial Input1.0 Vp-p/75 ohms0.3 Vp-p/75 ohmsIn(RCA) 1.0 Vp-p/75 ohmsOut(RCA) 1.0 Vp-p/75 ohmsIn(RCA)-8 dBm/50 K ohmsOut(RCA)-8 dBm/1 K ohmsVHF/UHF IN 75 ohms coaxial25-9/16" (W) x 19-11/16" (D) x 22-1/2" (H)80.5 IbsReceiving Channels:Antenna Input Impedance:Inputs/Outputs: S-Video: Y-Input:C-Input:Video:Audio:Antenna:Dimensions:Weight:TROUBLESHOOTING GUIDEBefore requesting service, please refer to the following chart for the symptom and possible solution.Remote ControlBatteries (AA) x 2ACCESSORIESSPECIFICATIONSAC Power Input:AC Power Consumption:Chassis Construction:Picture Tube:Horizontal resolution:Audio Power Output Rating:Speaker:Tuner Type:Remote Control:120V, 60Hz125 WattsIC Solid state27" (measured diagonally)260 lines1.5 + 1.5 Watts2" x 3-1/2" Full Range, 8 ohms x 2181 Channel, Quartz PLL FrequencySynthesizedInfrared, Direct Access, 2 x AA batteries(supplied)SYMPTOMS POSSIBLE SOLUTIONS• Make sure the power cord is plugged in.• Try another AC outlet.• Power is off, check fuse or circuit breaker.• Unplug unit for an hour, then plug it back in.• Station or CATV experiencing problems, tune to another station.• Make sure channels are set into memory.• Check antenna or CATV connections, adjust antenna.• Check for sources of possible interference.• Check picture control adjustments.• Station or CATV experiencing problems, tune to another station.• Make sure channels are set into memory.• Station is weak, adjust antenna to receive desired station.• Check for sources of possible interference.• Station or CATV experiencing problems, tune to another station.• Make sure channels are set into memory.• Check picture control adjustments.• Check antenna or CATV connections, adjust antenna.• Check for sources of possible interference.• Station or CATV experiencing problems, tune to another station.• Make sure channels are set into memory.• CATV company is scrambling signal.• Adjust antenna.• Check all CATV connections.• Set TV/CATV menu option to the CATV mode.• Station or CATV system problems, try another station.• Check antenna connections, adjust or re-direct antenna.• Check for sources of possible interference.TV does not operatePoor sound or No soundPoor picture or No pictureHorizontal or diagonal bars on screen• Select proper language in the SET UP mode.Display is not shown in your languageNo reception above channel 13No CATV receptionPicture wobbles or driftsPoor reception on some channels• Batteries are weak, dead or inserted incorrectly.• Remote is out of range, move closer to TV (within 15 feet).• Make sure Remote is aimed at sensor.• Confirm there are no obstructions between the Remote and the TV.• Make sure the power cord is plugged in.• Make sure TV/CATV menu option is in the appropriate mode.• If using antenna, check UHF antenna connections.• No broadcast on station tuned.• Timer is set.• Power interrupted.• TV station experiencing problems or program tuned is not closedcaptioned. Try another channel.• Check CATV connection or VHF/UHF antenna, reposition or rotateantenna.• Select the Closed caption.Cannot see closed captionNo Remote operationTV shuts offPoor color or no color• Station or CATV experiencing problems, tune to another station.• Check sound adjustments (VOLUME and MUTE).• Check for sources of possible interference.