Getting StartedNetwork CameraModel No. BL-C1APlease read the Important Information manual before using.This Getting Started explains how to connect, set up and mount thecamera. See the Operating Instructions on the Setup CD-ROM fordetails about the camera's features.• If you cannot complete the setup, see the Troubleshooting manual on the Setup CD-ROM.Indoor Use OnlyTrademarks• Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.• Microsoft, Windows and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.• Screen shots reprinted with permission from Microsoft Corporation.• All other trademarks identified herein are the property of their respective owners.• This software is based in part on the work of the Independent JPEG Group.Abbreviations• UPnP is the abbreviation for "Universal Plug and Play".• "Network Camera" is called "Camera" in this manual.• "Setup CD-ROM" is called "CD-ROM" in this manual.1. Connect the camera to your router.Router(Customer-provided)WAN 4 3 2 1 LAN• Confirm that the indicator lights green after about1 minute.• When you operate the camera, the power outletshould be near the camera and easilyaccessible.• Use only specified Panasonic AC adaptor (OrderNo.PQLV206Y).• If the indicator does not light green, see page 3and 4 of Troubleshooting on the CD-ROM.• The camera may become warm. This is not amalfunction.The indicatorlights green.AC adaptorEthernet cable(Straight Cat5 cable,Customer-provided)ModemInternetPC(For setup and display)(Customer-provided)Connect the Ethernet cable (customer-provided) to the camera and the router.The PC should be connected to the router, and to the Internet, in advance.Plug the AC adaptor into the outlet.Connect the AC adaptor cord to the DC Injack.Panasonic System Networks Co., Ltd. 2005PQQX14937YA KK0905YT2020