Panasonic BB-HCM311 Getting Started

Also see for BB-HCM311: Operating instructions Specifications Operating instructions Troubleshooting Installation

Contents

Panasonic BB-HCM311 Getting Started Manual pdf 1 page image

2005 Panasonic Communications Co., Ltd. All Rights Reserved.PSQX3753ZB KK0505JT1056Getting StartedNetwork CameraModel No. BB-HCM311BB-HCM331Inserting the AC plug of the AC cord to the outlet powers up the camera.Connect the Ethernet cable to your router.Hook the AC adaptor cord to the Hook for AC adaptor cord.Indoor Use onlyOutdoor ReadyConnect the Ethernet cable (customer-provided) to thecamera.2. Turn the camera on.1. Connect the camera to your router. 3. Set up the camera.Connect the camera to your router with an Ethernet cable to set up the camera.• Before you begin the installation, the UPnPTM feature in your routerneeds to be enabled. Usually, the default setting disables thisfeature. For more info, please visit,http://panasonic.co.jp/pcc/products/en/netwkcam/ or contact yourrouter's manufacturer.• These instructions assume your PC is already connected to the Internetand your home network includes a router that is UPnP TM (Universal Plugand Play) compliant.• The camera will be connected to your router using a "straight" Cat5network cable (customer-provided).Connect the AC adaptor cord to the DC In jack, and plug theAC cord into the outlet.• The AC cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible.• Use only specified Panasonic AC adaptor PQLV202 (Order No.PQLV202X [for BB-HCM311], PQLV202V [for BB-HCM331]).• If the indicator does not light green, see page 3 of the Troubleshooting manual(for BB-HCM311) or page 44 of the Installation/Troubleshooting manual (for BB-HCM331) on the Setup CD-ROM.• A noise can be heard during pan/tilt operation. This is normal.Trademarks• Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.• Microsoft, Windows and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.• Screen shots reprinted with permission from Microsoft Corporation.• All other trademarks identified herein are the property of their respective owners.• This software is based in part on the work of the Independent JPEG Group.Abbreviations• UPnP is the abbreviation for "Universal Plug and Play".• "Network Camera" is called "Camera" in this manual.Insert the Setup CD-ROM into the CD-ROM drive ofthe PC.(If the Network Camera Setup window is not displayed automatically,double-click "Setup.exe" file on the Setup CD-ROM.)Select the camera to set up and click [Execute].• This program searches for the cameras that are connected to the routerand displays the MAC Addresses, IP addresses and Port Numbers.Displays the camera manuals.If your PC does not have Adobe®Acrobat® Reader®, install it fromthe Adobe Reader website.Closes the Setup Program.• The MAC Address on the rear side (see page 16 of the Operating Instructionson the Setup CD-ROM.) of the camera shows which camera you select onthe Camera List window.Displays version informationabout this program.Sets up the camera.Click [Camera Setup].Installs Network Camera Recordertrial version.• If Windows Security Alert is displayed, click [Unblock].• If the indicator does not light green, check the connection. (See page 14 ofthe Operating Instructions on the Setup CD-ROM)• If more than 20 minutes have passed since the camera was turned on, thecamera cannot be set up from the Setup Program. In this situation,disconnect the AC cord from the outlet, and reconnect it again.• The Setup Program may not list any cameras due to your firewall orantivirus software settings on your PC. If you cannot disable your firewall orantivirus software, you can set up the camera entering the camera MACaddress on the following window. The camera's MAC address can be foundon the label affixed to the back of each camera. See page 16 of theOperating Instructions on the Setup CD-ROM for details.NoteCameraList windowDisplays IPv4 orIPv6 information.CameraStatusPortNo.MACAddressIPAddressTo yourrouterAC adaptor cordAC cordAC adaptor To the outletImportant• To avoid any possible problems, temporarily disable any firewallor antivirus software.• This procedure explains installation of the camera on the samenetwork that your PC is part of.• Before proceeding, close your web browser.Please read the Installation manual (for BB-HCM311) or theInstallation/Troubleshooting manual (for BB-HCM331) before using.This Getting Started explains how to connect, set up and mount thecamera. See the Operating Instructions on the Setup CD-ROM fordetails about the camera features.• The Setup CD-ROM provides Getting Started in the following languages: English,French, German, Italian, Spanish, Russian and Chinese.• If you cannot complete the setup, see the Troubleshooting manual (for BB-HCM311) orthe Installation/Troubleshooting manual (for BB-HCM331) on the Setup CD-ROM.• The illustrations used in Getting Started are of BB-HCM331.Ethernet portEthernet cableTo your routerLAN ports WAN portTo the supplyTo the cameraTo your PCTo your modemEthernet cable(Straight Cat5 cable)(Customer-provided)

/ 4

Related manuals for Panasonic BB-HCM311