Getting StartedNetwork CameraModel No. BL-C301. Check the included accessories.The following items are provided with the camera.3. Connect the camera to your router.2.Main Unit . . . . . . . . . . . . . . . . . . 1 pc. AC Adaptor . . . . . . . . . . . . . 1 pc.Order No. PQLV202X(Cord Length: About 3 m)4. Turn the camera on.Inserting the AC plug of the AC cord to the outlet powers up the camera.2005 Panasonic Communications Co., Ltd. All Rights Reserved.PSQX3599ZA KK0205YT0 (CE)Connect the Ethernet cable to the camera.AC CordCPUProtocolInterfaceWeb BrowserItem DescriptionTCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)10/100 Mbps network card installedInternet Explorer 6.0 or later (Not included on the Setup CD-ROM)Please read the Installation/Troubleshooting manual before using.This Getting Started explains how to connect, set up and mount thecamera. See the Operating Instructions on the Setup CD-ROM fordetails about the camera features.• The Setup CD-ROM provides Getting Started in the following languages:English, French, German, Italian, Spanish, Russian and Chinese.• If you cannot complete the setup, see the Troubleshooting section ofthe Installation/Troubleshooting manual.AC Cord . . . . . . . . . . . . . . . . . . . 1 pc.Order No.: PFJA02A006Z(Cord Length: About 1.8 m)Setup CD-ROM . . . . . . . . . . 1 pc.Order No.: PSQX3601ZCD(Operating Instructions, Installation/Troubleshooting, Getting Started,Setup Program, Network CameraRecorder Trial Version)Screws . . . . . . . . . . . . . . . . . . 2 pcs.Order No.: PQHE5004YWashers . . . . . . . . . . . . . . . . . 2 pcs.Order No.: XWG35FJGetting Started(This manual) . . . . . . . . . . . .1 pc.Installation/Troubleshooting . . . . . . . . .1 pc.Check the system requirement foryour PC.Your PC (Personal Computer) and network must meet the following tech-nical specifications for the camera to work properly.OperatingSystemMicrosoft® Windows ® XP, Microsoft® Windows® 2000,Microsoft® Windows ® Me, Microsoft® Windows ® 98SEPentium® III (500 MHz or greater is recommended.)• See Panasonic Network Camera support website athttp://panasonic.co.jp/pcc/products/en/netwkcam/ for the latest informationabout web browser.Trademarks• Adobe, Acrobat and Reader are either registered trademarks or trademarks ofAdobe Systems Incorporated in the United States and/or other countries.• Microsoft, Windows, and ActiveX are either registered trademarks or trade-marks of Microsoft Corporation in the United States and/or other countries.• Pentium is a trademark or registered trademark of Intel Corporation or its sub-sidiaries in the United States and other countries.• Screen shots reprinted with permission from Microsoft Corporation.• All other trademarks identified herein are the property of their respective owners.• This software is based in part on the work of the Independent JPEG Group.Abbreviations• UPnP is the abbreviation for "Universal Plug and Play".• "Network Camera" is called "Camera" in this Getting Started.Connect the camera to your router with an Ethernet cable to set up the camera.• Before you begin the installation, the UPnP™ feature in your router needs to be enabled. Usually, the default setting disables this feature. For more info, pleasevisit, http://panasonic.co.jp/pcc/products/en/netwkcam/ or contact your router's manufacturer.• These instructions assume your PC is already connected to the Internet and your home network includes a router that is UPnP™ (Uversal Plug and Play) compliant.• The camera will be connected to your router using a "straight" Cat5 network cable (customer-provided).Confirm that the switch on the bottomof the camera is set to WIRED.To the Ethernet (LAN)port of the cameraEthernet cable(Straight Cat5 cable)(Customer-provided)Connect the AC adaptor cord from theAC adaptor to the DC IN jack.Connect the AC plug of the ACcord to the outlet.• Use only specified Panasonic AC adaptorPQLV202 (Order No.PQLV202X).Caution: The AC cord is used as the maindisconnect device, ensure that the socket-outlet is located/installed near the equip-ment and is easily accessible.After the lens moves (pan/tiltoperation), confirm that the indicatorlights green after a minute.• If the indicator does not light green, see page19 and 20 of the Installation/Troubleshooting.• A noise can be heard during pan/tiltoperation. This is normal.The indicatorlights green.To your routerAC AdaptorTo the cameraTo the outletTo a LAN port of your routerTo your ModemTo your PCTo the outletEthernet cable(Straight Cat5 cable)(Customer-provided)Connect the Ethernet cable to yourrouter.AC adaptor CordTo the DC IN jack ofthe cameraTo your routerWIREDWIRELESSSwitch
