Panasonic BL-C10 Getting Started

Also see for BL-C10: Operating instructions Installation & configuration guide Installation & troubleshooting guide

Contents

Panasonic BL-C10 Getting Started Manual pdf 1 page image

Getting StartedNetwork CameraModel No. BL-C101. Check the included accessories.The following items are provided with the camera.3. Connect the camera to your router.Connect the camera to your router with an Ethernet® cable to set up the camera.2. Check the system requirement foryour PC.Your PC (Personal Computer) and network must meet the following tech-nical specifications for the camera to work properly.Main Unit . . . . . . . . . . . . . . . . . . 1 pc. AC Adaptor . . . . . . . . . . . . . 1 pc.Order No.: PQLV202X(Cord Length: About 3 m [9.84 feet])Setup CD-ROM . . . . . . . . . . 1 pc.Order No.: PSQX3601ZCD(Operating Instructions, Installation/Troubleshooting, Getting Started,Setup Program, Network CameraRecorder Trial Version)Screws . . . . . . . . . . . . . . . . . . . 2 pcs.Order No.: PQHE5004YWashers . . . . . . . . . . . . . . . . . .2 pcs.Order No.: XWG35FJPlease read the Installation/Troubleshooting manual before using.This Getting Started explains how to connect, set up and mount thecamera. See the Operating Instructions on the Setup CD-ROM fordetails about the camera features.• If you cannot complete the setup, see the Troubleshooting section ofthe Installation/Troubleshooting manual.Trademarks• Adobe and Acrobat are either registered trademarks or trademarks of AdobeSystems Incorporated in the United States and/or other countries.• Ethernet is either a registered trademark or a trademark of Xerox Corporationin the United States and/or other countries.• Microsoft, Windows, and ActiveX are either registered trademarks or trade-marks of Microsoft Corporation in the United States and/or other countries.• Pentium is a trademark or registered trademark of Intel Corporation or its sub-sidiaries in the United States and other countries.• Screen shots reprinted with permission from Microsoft Corporation.• All other trademarks identified herein are the property of their respective owners.Abbreviations• UPnP is the abbreviation for Universal Plug and Play.• "Network Camera" is called "Camera" in this Getting Started.4. Turn the camera on.Inserting the AC plug of the AC cord to the outlet powers up the camera.After you let the Ethernetcable through the hole, attachthe cable cover to the camera.• See Panasonic Network Camera support website athttp://panasonic.co.jp/pcc/products/en/netwkcam/ for the latest informationabout web browser.Push the cable cover to the left, let goof the tab from the unit, and pull it.Connect the Ethernet cable to yourrouter.Connect the Ethernet cable to the camera.Connect the power cord fromthe AC adaptor to the DC INjack.After the lens moves (pan/tiltoperation), confirm that the indi-cator lights green after a minute.• If the indicator does not light green,see page 16 and 17 of the Installation/Troubleshooting.• A noise can be heard during pan/tiltoperation. This is normal.OperatingSystemCPUProtocolInterfaceWeb BrowserItem DescriptionMicrosoft® Windows® XP, Microsoft® Windows® 2000,Microsoft® Windows® Me, Microsoft® Windows® 98SEPentium® III (500 MHz or greater is recommended.)TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)10/100 Mbps network card installedInternet Explorer 6.0 or later (Not included on the Setup CD-ROM)Installation/Troubleshooting . . . . . . . . . 1 pc.Getting Started(This manual) . . . . . . . . . . . .1 pc.AC Cord . . . . . . . . . . . . . . . . . . . 1 pc.Order No.: PFJA02A006ZPush the cable cover to the left,let go of the tab from the unit.Pull.12To a LAN port of your routerTo your ModemTo your PCTo the outletEthernet cable(Straight Cat5 cable)(Customer-provided)Ethernet cable(Straight Cat5 cable)(Customer-provided)To the Ethernet (LAN)port of the cameraTo your routerPower CordTo the DC IN jack ofthe cameraTo the routerAC cordAC adaptor To the power outletTo the cameraAttach the cable cover lettingthe Ethernet cable through the hole.• These instructions assume your PC is already connected to the Internet and your home network includes a router that is UPnPTM(Universal Plug and Play) compliant.• The camera will be connected to your router using a "straight" Cat5 network cable (customer-provided).• The Setup CD-ROM provides Getting Started in the following languages:English, French, German, Italian, Spanish, Russian and Chinese.Caution: The AC cord is used asthe main disconnect device, ensurethat the socket-outlet is located/installed near the equipment and iseasily accessible.• Before you begin the installation, the UPnPTM feature in your router needs to be enabled. Usually, the default setting disables this feature.For more info, please visit, http://panasonic.co.jp/pcc/products/en/netwkcam/ or contact your router's manufacturer.Connect the AC plug of theAC cord to the power outlet.• Use only specified PanasonicAC adaptor PQLV202(Order No.PQLV202X).The indicatorlights green.2004 Panasonic Communications Co., Ltd. All Right Reserved.PSQX3327YB KK0904RM2115 (CE)

/ 4

Related manuals for Panasonic BL-C10