Panasonic AKHRP200 Operating Instructions Manual

Also see for AK-HRP200G: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AKHRP200 Operating Instructions Manual Manual pdf 20 page image

20ROP.menu.setting. (continued)Item Display Function+GAIN -31׀0׀31Changes the detail gain level in+ (up) direction-GAIN -31׀0׀31Changes the detail gain level in -(down) directionHD.DTL/SKIN.DTL.(2/2)→ ＊＊ＨＤＤＴＬ／ＳＫＩＮＤＴＬ（２／２）＊＊ＳＫＩＮＤＥＴＡＩＬＳＷＩＴＣＨＣＵＲＳＯＲＳＫＩＮＧＥＴＣＲＩＳＰＰＨＡＳＥＷＩＤＴＨＳＡＴＵＭＥＭＯＲＹＳＥＬＥＣＴＡＢＺＥＢＲＡＳＷＩＴＣＨＥＦＦＥＣＴＭＥＭＯＲＹＯＦＦＯＦＦＡ＋ＢＡ００００００００ＮＯ�ＯＦＦＯＮ／ＯＦＦＨ９６０Ｖ２７０( indicates factory default settings.)Item Display FunctionSKIN.DETAIL.SWITCHOFFONEnables or disables control ofskin tone detail in HDTV videooutput.CURSOR OFFONEnables or disables the positioncursor that obtains the saturationand color phase information forcontrolling skin tone detail.POS.H 1׀960׀1920Sets horizontal cursor position.POS.V 1׀270.540Sets vertical cursor position.SKIN.GET NO?EXECUTECANCELAutomatically obtains thesaturation and color phaseinformation from the cursorposition.NO?:Cancels operation.EXECUTE:Automatically obtainssaturation and color phaseinformation from the cursorposition.CANCEL:Discards the saturation andcolor phase informationobtained from the cursorposition.MEMORY.SELECTABChanges memory locationsfor saving the skin tone detailsettings (CRISP, PHASE,WIDTH and SATURATION).MEM.A.CRISP -63׀0׀63Removes very faint noisecomponents from detailcomponents in skin tone areasin memory bank A.MEM.A.PHASE 0׀359Changes the color phase of skintone areas in memory bank Ain a range from 0 to 359 on avector display.Item Display FunctionMEM.A.WIDTH 0׀255Expands the width of skin toneareas in memory bank A in arange from 0 to 255.MEM.A.SATU 0׀255Changes the saturation of skintone areas in memory bank A ina range of 0 to 255.MEM.B.CRISP -63׀0׀63Removes very faint noisecomponents from detailcomponents in skin tone areasin memory bank B.MEM.B.PHASE 0׀359Changes the color phase of skintone areas in memory bank B ina range of 0 to 359 on a vectordisplay.MEM.B.WIDTH 0׀255Expands the width of skin toneareas in memory bank B in arange from 0 to 255.MEM.B.SATU 0׀255Changes the saturation of skintone areas in memory bank B ina range from 0 to 255.ZEBRA.SWITCH OFFABA+BAdds a zebra pattern to theY signals of the PM output tomake areas subject to skin tonedetail effects easily visible.EFFECT.MEMORYABA+BSelects the memory bank towhich skin tone detail effects willbe added.SD.DETAIL→ ＊＊ＳＤＤＥＴＡＩＬ＊＊ＤＥＴＡＩＬＳＷＩＴＣＨＶＤＥＴＡＩＬＨＤＥＴＡＩＬＣＲＩＳＰＰＥＡＫ１ＰＥＡＫ２ＬＥＶＥＬＤＥＰＥＮＤＥＮＴＤＡＲＫＤＥＴＡＩＬＯＮＯＦＦ３５％１５０３．１７Ｍ( indicates factory default settings.)Item Display FunctionDETAIL.SWITCH ONOFFEnables or disables changes incontour enhancement (hard/soft)level of SDTV video output.V.DETAIL 0׀3׀63Adjusts the amount of verticaldetail.H.DETAIL 0׀5׀63Adjusts the amount of horizontaldetail.CRISP 0׀63Sets the maximum amplitude ofthe very faint noise componentsthat are removed from detailcomponents.PEAK1 1.89M/2.18M/2.56M/3.17M/4.0M/5.28M/6.75MSelects one of the two contourcorrection frequency bands(boost frequency or peakfrequency). Changes the contourwidth.PEAK2 OFF/1.89M/2.18M/2.56M/3.17M/4.00M/.5.28M/6.75MSelects one of the two contourcorrection frequency bands(boost frequency or peakfrequency). Changes the contourwidth.