11Setup.Mode.Operations.(continued)7-2.Set.pedestalPress..or..to.select.[PE].and.press..to.confirm.the.selection.NDM.GAINIRISM.PEDCCSHTSYNC•To exit setup mode, hold down for about 2 seconds.•To make other settings, press 8..Set.buzzer.(beep/call.tone)1..Press..select.menu.number.[8].CAMERANo.DATASETDISPLAY SELECTUPDOWNSET UPND/CCM.GAIN/M.PEDSHUTTERNDM.GAINIRISM.PED10-19CCSHTSYNCSELECTEXECUTEEXITSAVE/LOADSHIFT+UP+DOWNSelect on/offPress to select themenu numberPress to exit setup mode(hold down)Press to confirm2..Press..or..to.select.[on].and.press..to.confirm.the.selection.NDM.GAINIRISM.PEDCCSHTSYNC•To exit setup mode, hold down for about 2 seconds.•To make other settings, press 9.Display.brightness.setting.(LED/7-segment.display)Press..select.menu.number.[9].CAMERANo.DATASETDISPLAY SELECTUPDOWNSET UPND/CCM.GAIN/M.PEDSHUTTERNDM.GAINIRISM.PED10-19CCSHTSYNCSELECTEXECUTEEXITSAVE/LOADSHIFT+UP+DOWNAdjust brightnessLED display brightness7-segment display brightnessPress to select themenu numberPress to exit setup mode(hold down)Press to confirmLED/7-segment display switch9-1.Set.LED.brightness1..Press..to.select.[ND].and.press..to.confirm.the.selection.•Each press of toggles between [ND] (LED displaybrightness) and [CC] (7-segment display brightness).NDM.GAINIRISM.PEDCCSHTSYNC2..Press..or..to.select.LED.display.brightness.and.press..to.confirm.the.selection.NDM.GAINIRISM.PEDCCSHTSYNC•To exit setup mode, hold down for about 2 seconds.•To make other settings, press 9-2.Set.7-segment.display.brightness1..Press..to.select.[CC].and.press..to.confirm.the.selection.•Each press of toggles between [ND] (LED displaybrightness) and [CC] (7-segment display brightness).NDM.GAINIRISM.PEDCCSHTSYNC2..Press..or..to.select.7-segment.display.brightness.and.press..to.confirm.the.selection.NDM.GAINIRISM.PEDCCSHTSYNC•To exit setup mode, hold down for about 2 seconds.•To make other settings, press Menu.numbers.10.to.15.are.for.future.use.16.Initialize.settingsWhen settings are initialized, the unit is automatically restarted.Fordetails on what settings are initialized, refer to page 61..Press..select.menu.number.[16].CAMERANo.DATASETDISPLAY SELECTUPDOWNSET UPND/CCM.GAIN/M.PEDSHUTTERNDM.GAINIRISM.PED10-19CCSHTSYNCSELECTEXECUTEEXITSAVE/LOADSHIFT+UP+DOWNSelect y (Initialize)/n (Cancel)Press to select themenu numberPress to exit setup mode(hold down)Press to confirm
