Panasonic AK-HRP200G Operating Instructions Manual

Also see for AK-HRP200G: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AK-HRP200G Operating Instructions Manual Manual pdf 24 page image

24Data.handled.in.the.studio.camera.systemThe following shows the data handled in the studio camera system.The AK-HRP200 (ROP) memory card stores camera and CCU data.AK-HC3800 (Camera)LENS 1LENS 32LENS 1LENS 32USER 1USER 2USER 3USER 2USER 3SCENE 1SCENE 2SCENE 3SCENE 4USER 1USER 2USER 3SCENE 1SCENE 2SCENE 3SCENE 4SCENE 1SCENE 2SCENE 3SCENE 4AK-HCU200 (CCU) AK-HRP200 (ROP)USER 1Operation data(for camera)Operation data(for CCU)Scene file(for camera)Scene file(for CCU)Memory cardName Quantity Description Data.R/W Memory.card.R/WLens.file.(LENS) 1 to 32 This data is used by video engineers (VE) to correct the characteristicsspecific to the lenses and is managed by the camera. It can be saved andread by operation on the ROP. It can also be saved and read to/from thememory card on the ROP.For a list of data, refer to the Operating Instructions for AK-HRP200G.ROP ROPScene.file.(SCENE) 1 to 4 This data for creating pictures is handled mainly by video engineers (VE) andis managed by the camera. It can be saved and read by operation on theROP. It can also be saved and read to/from the memory card on the ROP.For a list of data, refer to the Operating Instructions for AK-HRP200G.ROP ROPUser.file.(USER) 1 to 3 This system setting data consists of scene file managed by the camera,camera operation data, and scene file managed by the CCU. It can be savedand read by operation on the ROP. It can also be saved and read to/from thememory card on the ROP.ROP ROP .Initializing.dataNameHow.to.initialize.dataHold down while pressing and on the ROP to initialize.(When initialization completes, turn off the CCU.)Initializing using camera, CCU and ROP functionsScene.files : Are initialized *2 -User.files : Are initialized *2 -Lens.files : Are initialized -Camera.settings : Are initialized *3 -CCU.settings : Are not initialized : Choose [SYSTEM] > [INTIALIZE] in the CCU menu toinitialize. *4ROP.settings : Are not initialized : Use [16] in the ROP setup menu to initialize.*1 Includes [SD DETAIL] settings of scene files and user files.*2 [SD DETAIL] settings are not initialized.*3 Frame frequency is also initialized.When a camera image does not appear after initialization, check whether the frame frequency matches the (frequency) of the CCU [CCU MODE].*4 [Frame frequency] of [CCU MODE] is also initialized.When a camera image does not appear after initialization, check whether [CCU MODE] matches the frame frequency of the camera.